Equilibrium (HT)

Test yourself on Equilibrium (HT) with exam style questions, marked instantly.

Flashcards that come back just before you would forget them.

A revision plan that remembers what you know and shows what to do next.

See which topics you have nailed and which need another look.

Quiz yourself on Equilibrium (HT)Get your flashcardsBuild my revision planTrack my progress

📖 The Dance of Dynamic Balance

Imagine a crowded dance floor where people are constantly moving between two rooms. Sometimes more people flow into Room A, sometimes into Room B. But if the same number of people enter each room every minute as leave it, the rooms stay at constant "fullness" — even though everyone is still moving. This is dynamic equilibrium. In chemistry, reversible reactions reach a point where the forward and backward reactions happen at exactly the same rate. Nothing seems to change, but at the molecular level, everything is still reacting. And here's the clever part: if you disturb this balance, the system shifts to restore it. This is Le Chatelier's Principle.
⚖️ The Stubborn Scale Analogy

Equilibrium is like a stubborn balance scale! If you add weight to one side, the scale shifts to oppose the change. Add more reactants? The system shifts to make more products. Increase pressure? It shifts to the side with fewer gas molecules. The system always tries to counteract what you do — that's Le Chatelier's Principle!

📐 Dynamic Equilibrium — Rate-Time Graph

Graph of rate of reaction against time. The forward reaction starts with a high rate that falls. The reverse reaction starts at zero and its rate rises. The two curves meet and then continue as one flat line, where both rates are equal. A dashed vertical line from the meeting point to the time axis is labelled equilibrium reached.

Figure 1: At equilibrium, the forward and backward reaction rates are equal. Concentrations remain constant but both reactions still occur.

🔬 Deep Dive: Dynamic Equilibrium

A reversible reaction is one that can go in both directions — products can turn back into reactants. The symbol ⇌ (two half-arrows pointing in opposite directions) is used to show this. You will see it in equations such as N₂ + 3H₂ ⇌ 2NH₃, meaning the reaction can proceed both left-to-right and right-to-left. (If you have studied Topic 35 Reversible Reactions, this notation is already familiar.)

At equilibrium:

Rate of forward reaction = Rate of backward reaction

Why are concentrations constant at equilibrium? Both reactions are happening at the same speed, so every molecule of product being made is balanced by one being destroyed. The net result is no overall change — like filling a bath with the plug out, where water flows in at the same rate it drains. The level stays constant not because nothing is happening, but because two opposing processes are perfectly balanced.

Key features of equilibrium:

  • Dynamic — reactions are still happening in both directions
  • Closed system — nothing can enter or leave
  • Concentrations are constant — but not necessarily equal
  • Position can be changed — by altering conditions

🎓 Le Chatelier's Principle (Higher Tier)

"If a system at equilibrium is disturbed, it will shift in the direction that opposes the change."

Effect of changing CONDITIONS:

Condition changed Direction of shift Why
Temperature ↑ Shifts in the ENDOTHERMIC direction System absorbs the extra heat
Temperature ↓ Shifts in the EXOTHERMIC direction System releases heat to compensate
Concentration of reactant ↑ Shifts to PRODUCTS (right) System uses up the added substance
Concentration of product ↑ Shifts to REACTANTS (left) System uses up the added substance
Pressure ↑ (gases only) Shifts to side with FEWER gas molecules System reduces the pressure
Pressure ↓ (gases only) Shifts to side with MORE gas molecules System increases the pressure

What about catalysts? Catalysts do NOT change equilibrium position — they help reach equilibrium faster by speeding up BOTH forward and backward reactions equally.

Quick Check: A student adds a catalyst to a reversible reaction at equilibrium. Explain whether the position of equilibrium shifts.

⚙️ How Le Chatelier's Principle Works

Le Chatelier's Principle is not magic — it has a chemical explanation. When conditions change, the forward and backward reaction rates become temporarily unequal, causing a net shift until equilibrium is re-established.

Example — adding more reactant:

  • Adding reactant increases its concentration
  • This increases the forward reaction rate (more collisions)
  • The backward rate is momentarily unchanged
  • Products accumulate → backward rate increases
  • A new equilibrium is reached with more products — the position has shifted right

Example — increasing temperature (for an exothermic forward reaction):

Think of heat energy as an extra reactant. Adding more heat is like adding more of that reactant — it pushes the equilibrium toward the endothermic direction, which uses up the extra heat.

  • More heat is supplied to the system
  • The system opposes the change by shifting in the direction that absorbs heat — the endothermic (backward) direction
  • More reactants form — equilibrium position shifts left
  • The yield of products decreases (but rate of reaching equilibrium increases)

🏭 Example: The Haber Process

N₂(g) + 3H₂(g) ⇌ 2NH₃(g)    ΔH = −92 kJ/mol (forward is exothermic)

Analysing conditions using Le Chatelier's Principle:

  • Low temperature → favours exothermic forward reaction → more NH₃ BUT too slow (impractical)
  • High pressure → favours fewer molecules (4 mol → 2 mol) → more NH₃ BUT very expensive equipment
  • Compromise: 450°C, 200 atm, iron catalyst — balances yield, rate, and cost

This is a classic exam example: the industrial conditions are a compromise between equilibrium position (yield) and rate of reaction (economics). Higher temperature gives faster rate but shifts equilibrium left; lower temperature is better for yield but reaction is too slow.

📖 Key Definitions

Dynamic equilibrium: A state reached in a closed system when the forward and backward reaction rates are equal, so concentrations remain constant. Both reactions still occur simultaneously.

Le Chatelier's Principle: If a system at equilibrium is disturbed by a change in conditions, the equilibrium position will shift in the direction that opposes the change.

Equilibrium position: A description of whether the equilibrium mixture contains mostly products (right) or mostly reactants (left), or approximately equal amounts.

Closed system: A system from which no matter can enter or escape, allowing equilibrium to be established.

📌 Key Facts: Equilibrium

  • Dynamic equilibrium: Forward rate = backward rate in a closed system
  • Le Chatelier's Principle: System shifts to oppose any change
  • Temperature ↑: Shifts in endothermic direction (absorbs heat)
  • Concentration ↑: Shifts away from the increased substance
  • Pressure ↑: Shifts to side with fewer gas molecules
  • Catalysts: Speed up both directions equally, no position change
  • Concentrations constant but not necessarily equal at equilibrium

⚠️ Common Misconceptions

Misconception 1: "Equilibrium means equal amounts of products and reactants"

At equilibrium, the rates of the forward and backward reactions are equal — not the concentrations. The equilibrium mixture may contain much more product than reactant, or vice versa. The ratio of products to reactants depends on the specific reaction and the conditions.

Misconception 2: "A catalyst shifts the equilibrium position to the right"

A catalyst speeds up both the forward and backward reactions equally. Therefore it has no effect on the equilibrium position — the ratio of products to reactants at equilibrium is unchanged. It only makes equilibrium reached faster.

Misconception 3: "Increasing temperature always increases the yield of products"

Increasing temperature shifts equilibrium in the endothermic direction. If the forward reaction is exothermic (as in the Haber process), increasing temperature shifts equilibrium left — towards reactants — actually reducing the yield of products. Temperature and yield trade off against each other in industrial processes.

🧠 Memory Aid: Le Chatelier = The Lazy System

Think of the equilibrium system as lazy and oppositional — it always does the opposite of what you try to do to it:

  • Add heat? → System absorbs heat (endothermic direction)
  • Remove heat? → System releases heat (exothermic direction)
  • Add reactant? → System uses it up (shifts to products)
  • Increase pressure? → System reduces molecules (smaller side)

The system is like a teenager asked to do chores — it always does the opposite of what you want! Whatever change you make, it tries to undo it.

For pressure specifically: COUNT the gas molecules on each side. High pressure shifts to the side with fewer gas molecules (because that reduces pressure).

🎯 Exam Focus: Equilibrium

very-high Le Chatelier questions (3-4 marks HT): State the direction of shift, explain why using the principle, and state the effect on yield.

high Haber process analysis (3-4 marks): Explain the compromise conditions — why 450°C rather than lower temperature, why 200 atm rather than higher.

medium Dynamic equilibrium definition (2 marks): Must include "rates are equal" AND "closed system" AND "both reactions still occurring".

Key phrase to earn marks: "The equilibrium position shifts to the [left/right], increasing/decreasing the yield of [product/reactant]."

Edexcel 1CH0: Examined in Paper 2 (1CH0/2). Le Chatelier's principle is Higher tier in Edexcel 1CH0 — expect questions on effect of temperature, pressure, and concentration on equilibrium position. In Edexcel-style questions, the command word "Suggest" appears frequently — use your chemistry knowledge to apply to an unfamiliar context.

OCR B J258 (Twenty First Century Science): This sits in module C6 "Making Useful Chemicals" and is assessed synoptically across all four papers rather than tied to one paper. Le Chatelier's principle is Higher tier here too, and J258 typically frames equilibrium questions around industrial trade-offs — yield vs rate vs cost, as in the Haber process — rather than testing the abstract principle alone.

💡 Exam Tips: Equilibrium

🎯 Common Question Types:

  • State what is meant by dynamic equilibrium (2 marks)
  • Predict the effect of changing conditions using Le Chatelier (3 marks HT)
  • Explain industrial compromise conditions for Haber process (4 marks)
  • Count gas molecules to predict pressure effect (2 marks)

📝 Key Command Words:

  • Predict: State direction of shift with reason
  • Explain: Give the Le Chatelier mechanism and yield effect
  • Evaluate: Weigh up yield vs rate vs cost for industrial conditions

⚠️ Common Mistakes to Avoid:

  • Saying catalysts shift equilibrium — they don't (reach it faster)
  • Confusing equal rates with equal concentrations
  • Forgetting to count gas molecules for pressure questions

Quick Check: N₂ + 3H₂ ⇌ 2NH₃ (forward reaction is exothermic). What happens to the yield of ammonia if temperature is increased?

Quick Check: For N₂ + 3H₂ ⇌ 2NH₃, what happens to the equilibrium position if pressure is increased?

📝 Worked Model Answer

Question: "The Haber process operates at 450°C and 200 atmospheres. Explain why these conditions are used." (6 marks)

The forward reaction in the Haber process is exothermic. [1] According to Le Chatelier's Principle, lower temperatures favour the exothermic forward direction, giving a higher yield of ammonia. [1] However, at very low temperatures the reaction is too slow to be economically viable, so 450°C is a compromise between yield and rate. [1] Looking at the equation, the left side has 4 moles of gas molecules (1 N₂ + 3 H₂) and the right side has only 2 moles (2 NH₃). [1] Increasing pressure shifts the equilibrium to the side with fewer gas molecules — the right side — increasing the yield of ammonia. [1] However, very high pressures require expensive equipment and are dangerous to maintain, so 200 atm is an economic compromise between yield and cost. [1]

Examiner note: This 6-mark question demands three paired arguments — one for temperature (Le Chatelier direction + rate compromise) and one for pressure (gas molecule count + economic compromise). A common error is writing "higher pressure gives more ammonia" without explaining the mechanism via gas molecule counts. The word "compromise" is key at both points and will be expected by the examiner for full marks.

Make this stick

Signing in gives access to all PrepWise features.

PrepWise is a trading name of A3M Quality Solutions Limited, registered in England and Wales, company number 14959172. Registered office: 202 Stroud Road, Gloucester, GL1 5LA. ICO registration ZC267069.