Factors Affecting Rate

Test yourself on Factors Affecting Rate with exam style questions, marked instantly.

Flashcards that come back just before you would forget them.

A revision plan that remembers what you know and shows what to do next.

See which topics you have nailed and which need another look.

Quiz yourself on Factors Affecting RateGet your flashcardsBuild my revision planTrack my progress

📖 Controlling the Speed of Chemistry

Why do we refrigerate food? To slow down the chemical reactions that cause decay. Why do we use a catalyst in car exhausts? To speed up the breakdown of toxic gases. Every day, we control reaction rates without even thinking about it. Crushing a sugar cube makes it dissolve faster. Using hot water makes a stain easier to remove. These aren't random observations — they're predictable consequences of collision theory. Once you understand WHY each factor works, you can predict and control reaction speeds in any situation.
🍳 The Cooking Analogy

Rate factors work just like cooking tips! Higher temperature (hot oven) = faster cooking. More concentration (more spice) = stronger reaction. Surface area (chopped vs whole veg) = faster cooking. Catalyst (pressure cooker) = speeds things up without being used up. Once you understand these principles, chemistry becomes as intuitive as cooking!

🔬 The Four Factors That Affect Rate

🌡️ 1. TEMPERATURE — Higher = Faster

  • Particles have more kinetic energy
  • Particles move faster → more frequent collisions
  • More particles have energy ≥ activation energy
  • Both effects increase successful collisions

🧪 2. CONCENTRATION — Higher = Faster

  • More particles in the same volume
  • Particles are closer together
  • More frequent collisions
  • More successful collisions per second

For gases: increasing PRESSURE has the same effect.

🔨 3. SURFACE AREA — Larger = Faster

  • More particles are exposed to the other reactant
  • More collisions can happen at once
  • Powders react faster than lumps

Same mass, but powder has much more exposed surface.

⚡ 4. CATALYSTS — Speed up without being used up

  • Provides an alternative reaction pathway
  • With a lower activation energy
  • More particles now have enough energy to react
  • Catalyst is unchanged at the end — can be reused

📐 Four Factors Affecting Rate of Reaction

Five factors affecting rate of reaction: temperature, concentration, surface area, catalyst, pressure

Figure 1: How each factor affects particle collisions. Temperature and concentration increase collision frequency; catalyst lowers the activation energy barrier.

📊 Comparing Reaction Graphs

When you change rate factors:

  • Faster reaction: Steeper initial curve, reaches plateau sooner
  • Same amount of limiting reactant: Same final amount of product (same plateau height)
  • More reactant: Higher plateau (more product made)
Higher temperature Higher concentration
Steeper curve, same final volume Steeper curve, same final volume (if same moles)

⚙️ How Each Factor Links to Collision Theory

Every factor that affects rate must be explained using collision theory. Here is the precise mechanism for each one:

  • Temperature: Higher temperature → particles have more kinetic energy → move faster → collide more frequently AND a greater proportion of particles now have energy ≥ Ea → more successful collisions per second → faster rate.
  • Concentration (or pressure for gases): More particles in the same volume → particles are closer together → collisions are more frequent → more successful collisions per second → faster rate. (Energy of particles does not change.)
  • Surface area: Breaking a solid into smaller pieces exposes more particles at the surface → more particles are available to collide with the other reactant → more collisions and more successful collisions per second → faster rate. (Energy and concentration don't change.)
  • Catalyst: Provides an alternative reaction pathway with a lower activation energy → a greater proportion of the existing collisions now have energy ≥ the new, lower Ea → more successful collisions per second → faster rate. Crucially, a catalyst is not consumed — it can catalyse the reaction again and again.

⚖️ Five Rate Factors — Side by Side

Factor Change What Increases? Effect on Ea?
Temperature ↑ Collision frequency AND proportion with E ≥ Ea Unchanged
Concentration ↑ Collision frequency only Unchanged
Pressure (gases) ↑ Collision frequency only Unchanged
Surface area ↑ Collision frequency (exposed particles) Unchanged
Catalyst Added Proportion of collisions with E ≥ Ea Lowered

📖 Key Definitions

Concentration: The amount of a substance dissolved in a given volume of solution (measured in mol/dm³). Higher concentration means more solute particles per unit volume.

Surface area: The total area of a solid that is exposed and available to react. Smaller particles have a greater surface area-to-volume ratio.

Catalyst: A substance that increases the rate of a reaction by providing an alternative reaction pathway with a lower activation energy. A catalyst is not consumed in the reaction and can be reused.

Enzyme: A biological catalyst — a protein molecule that speeds up reactions in living organisms. Enzymes are specific to one reaction and have an optimum temperature and pH.

📌 Key Facts: Factors Affecting Rate

  • Temperature ↑ → particles faster + more have Ea → more successful collisions
  • Concentration ↑ → more particles per volume → more frequent collisions
  • Surface area ↑ → more exposed particles → more collisions at once
  • Catalyst → lowers Ea → more particles can react
  • Pressure ↑ (for gases) → same effect as concentration
  • Catalysts are specific — each catalyst only works for certain reactions
  • Enzymes are biological catalysts

⚠️ Common Misconceptions

Misconception 1: "A catalyst is used up in the reaction"

A catalyst is not consumed. It provides an alternative pathway with lower activation energy and is reformed at the end of the reaction. This is why the same catalyst can speed up millions of reactions — it is not destroyed. Industrial catalysts (like iron in the Haber process) need replacing eventually due to physical wear, not chemical consumption.

Misconception 2: "Increasing temperature gives particles more energy, so more collide"

This is partially right but incomplete. Temperature affects rate in two ways: (1) more kinetic energy so more collisions, and (2) crucially, more particles now have energy above the activation energy. Exam questions award marks for both points. Simply saying "particles move faster" only earns partial credit.

Misconception 3: "Surface area changes the amount of product formed"

Increasing surface area only affects rate — how fast the reaction proceeds. The total amount of product formed depends on the moles of reactants, not their surface area. A powdered marble chip reacts faster with acid than a large lump, but both produce the same total amount of CO₂ if the same mass is used.

🧠 Memory Aid: CCTSP

Remember the five factors that affect rate of reaction using CCTSP:

  • C — Concentration (more particles per volume)
  • C — Catalyst (lowers activation energy)
  • T — Temperature (faster particles, more exceed Ea)
  • S — Surface area (more exposed particles)
  • P — Pressure (for gases — same as concentration)

Picture a chef (C) cooking (C) in the Test kitchen (T) with Special (S) Pans (P) — CCTSP rules the kitchen of chemistry!

🎯 Exam Focus: Factors Affecting Rate

very-high Explain questions (4-6 marks): For temperature questions, ALWAYS mention both effects: faster movement AND more exceed activation energy. One sentence for each.

very-high Graph comparison (3-4 marks): Interpret graphs showing different conditions — steepness, final amount, time to finish.

high Catalyst questions (2-3 marks): Explain by saying "lowers activation energy" not "provides energy to particles".

Key phrase to earn full marks: "...therefore there are more successful collisions per second, so the rate increases."

Edexcel 1CH0: Examined in Paper 2 (1CH0/2). Edexcel CP5 (temperature vs rate) and CP6 (concentration vs gas volume) are directly examined — know the experimental method and how to plot/interpret results. In Edexcel-style questions, the command word "Suggest" appears frequently — use your chemistry knowledge to apply to an unfamiliar context.

OCR B J258 (Twenty First Century Science): This sits in module C6 "Making Useful Chemicals" and is assessed synoptically across all four papers rather than tied to one paper. J258 often frames rate questions around an industrial or manufacturing context — why a factory changes temperature, concentration or surface area to control production rate and cost — rather than a bare lab investigation, so read the context carefully before applying collision theory. This is one of OCR B's highest-priority topics; expect an extended (level-of-response) question.

💡 Exam Tips: Factors Affecting Rate

🎯 Common Question Types:

  • Explain how increasing temperature increases rate (4 marks)
  • Compare two reaction graphs (3 marks)
  • Explain how a catalyst works (2 marks)
  • Predict the effect of doubling concentration (1-2 marks)

📝 Key Command Words:

  • Explain: Give mechanism — collision frequency AND energy
  • Compare: State similarities AND differences between graphs
  • Suggest: Apply collision theory to new context

⚠️ Common Mistakes to Avoid:

  • Saying catalysts "give energy" — they lower Ea instead
  • Only mentioning one temperature effect — must mention both
  • Confusing steeper gradient (faster rate) with higher plateau (more product)

Quick Check: Explain in two sentences why increasing concentration increases the rate of reaction.

Quick Check: Why does a catalyst not change the amount of product formed?

Quick Check: Which factor is the ODD ONE OUT and why — temperature, concentration, surface area, catalyst?

Make this stick

Signing in gives access to all PrepWise features.

PrepWise is a trading name of A3M Quality Solutions Limited, registered in England and Wales, company number 14959172. Registered office: 202 Stroud Road, Gloucester, GL1 5LA. ICO registration ZC267069.