The Haber Process & Fertilisers

Test yourself on The Haber Process & Fertilisers with exam style questions, marked instantly.

Flashcards that come back just before you would forget them.

A revision plan that remembers what you know and shows what to do next.

See which topics you have nailed and which need another look.

Quiz yourself on The Haber Process & FertilisersGet your flashcardsBuild my revision planTrack my progress

🌱 A Reaction That Feeds the World

About half of all the nitrogen atoms in your body right now came through the Haber process. Without it, the world could only support around 4 billion people — we currently feed 8 billion. It is arguably the most important industrial chemical reaction ever developed. The challenge: nitrogen gas is almost completely unreactive. Getting it to combine with hydrogen requires exactly the right pressure, temperature, and a catalyst — a compromise that took chemists decades to work out.

🔬 The Haber Process — Click to Explore

Industrial Haber process showing nitrogen and hydrogen cylinders, reactor with iron catalyst, condenser, liquid ammonia collection, and recycling loop. Click each part to explore.

⚗️ The Equation and Raw Materials

The Haber process makes ammonia (NH₃) from nitrogen and hydrogen:

N₂ + 3H₂ ⇌ 2NH₃    (forward reaction is exothermic)

The double arrow (⇌) shows the reaction is reversible — ammonia can decompose back into nitrogen and hydrogen.

Where do the raw materials come from?

  • Nitrogen — obtained from the air (78% of the atmosphere is N₂, separated by fractional distillation of liquid air)
  • Hydrogen — obtained from natural gas (methane + steam in a reaction called steam reforming): CH₄ + H₂O → CO + 3H₂

⚙️ Industrial Conditions

The Haber process is carried out under specific conditions that represent a careful compromise:

ConditionValue usedWhy this value?
Temperature~450°CCompromise between rate and yield
Pressure~200 atmospheresCompromise between yield and cost/safety
CatalystIron (with promoters)Speeds up rate without affecting equilibrium

The unreacted nitrogen and hydrogen are recycled back into the reactor so they are not wasted.

⚙️ Why These Conditions? (Le Chatelier's Principle)

The forward reaction produces fewer moles of gas: 4 moles of gas reactants → 2 moles of gas product. By Le Chatelier's principle:

  • High pressure favours NH₃ (shifts equilibrium toward fewer gas moles). But very high pressures are expensive to maintain and dangerous. ~200 atm is the economic sweet spot.
  • Low temperature favours NH₃ (forward reaction is exothermic; cooling shifts equilibrium to the right). But low temperatures make the rate too slow to be economically viable.
  • ~450°C is a compromise: the rate is fast enough for commercial production, but the yield of ammonia at equilibrium is only about 15–25%. The unreacted gases are recycled, so overall conversion is still high.
  • The iron catalyst speeds up the rate at which equilibrium is reached but does not change the position of equilibrium. It allows a lower temperature to be used, which improves the economics.

Quick Check: Why is a very high temperature not used in the Haber process even though it would speed up the reaction?

⚖️ Effect of Changing Conditions on the Haber Process

ChangeEffect on rateEffect on NH₃ yieldWhy?
Increase temperatureFasterLowerEquilibrium shifts left (exothermic fwd)
Decrease temperatureSlowerHigherEquilibrium shifts right
Increase pressureFasterHigherFewer moles of gas on right; costly/dangerous
Decrease pressureSlowerLowerEquilibrium shifts left
Add iron catalystFasterNo changeCatalyst speeds rate, not equilibrium position

📖 Key Terms

Haber process
The industrial process for manufacturing ammonia from nitrogen and hydrogen using an iron catalyst at ~450°C and ~200 atm.
Reversible reaction
A reaction in which the products can react to re-form the original reactants; shown by ⇌.
Equilibrium
The state in a reversible reaction where the forward and reverse reaction rates are equal and concentrations remain constant.
Le Chatelier's principle
If a change is made to a system at equilibrium, the position of equilibrium shifts to oppose that change.
Compromise conditions
Conditions chosen in an industrial process to balance yield, rate, and economic cost rather than optimising any single factor.

📋 Key Facts

  • Equation: N₂ + 3H₂ ⇌ 2NH₃
  • Forward reaction is exothermic
  • Nitrogen source: air (78% N₂)
  • Hydrogen source: natural gas (methane + steam)
  • Temperature: ~450°C (compromise)
  • Pressure: ~200 atm (compromise)
  • Catalyst: iron
  • Unreacted gases are recycled
  • Main use: manufacture of fertilisers (NPK fertilisers)
  • Equilibrium yield at 450°C/200 atm is only ~15–25% — recycling makes it viable

⚠️ Common Misconceptions

Misconception 1: "The catalyst increases the yield of ammonia"

The iron catalyst speeds up the rate at which equilibrium is reached — it does NOT change the position of equilibrium or the yield. It allows the process to reach equilibrium faster at a lower temperature.

Misconception 2: "Higher pressure always gives a higher yield, so the highest possible pressure is used"

Higher pressure does increase the yield, but very high pressures are extremely expensive to maintain (strong, thick-walled vessels and powerful compressors) and pose significant safety risks. 200 atm is the economically optimal compromise.

Misconception 3: "Hydrogen comes from the air"

Nitrogen comes from air. Hydrogen is obtained from natural gas (methane reacted with steam in steam reforming).

Quick Check: State one use of the ammonia produced by the Haber process.

🧠 Memory Aid — HINT

Remember the Haber conditions with HINT:

  • Hydrogen from natural gas (methane + steam)
  • Iron catalyst
  • Nitrogen from air
  • Temperature ~450°C, pressure ~200 atm (Two-Hundred)

And remember: "Low T, high P = more NH₃" — but industry uses a compromise because of rate and cost.

🎯 Exam Connection (OCR A J248)

Where it appears: Paper 2 (C5 Monitoring and Controlling Chemical Reactions). P3 topic — appears in roughly 1 in 3 sittings, typically 3–6 marks.

Typical question types:

  • "State the conditions used in the Haber process" (2–3 marks)
  • "Explain why a temperature of 450°C is used rather than a lower temperature" (2 marks — must address both rate AND equilibrium)
  • "Explain the effect of increasing pressure on the yield of ammonia" (2 marks)
  • "State one use of ammonia" (1 mark)

Key examiner demand: For "explain" questions, you MUST address both rate and yield/equilibrium. Stating only one gets partial credit. The word "compromise" is a useful signpost in your answer.

Edexcel 1CH0: Examined in Paper 2 (1CH0/2). Conditions (450°C, 200 atm, iron catalyst), Le Chatelier's principle applied to both temperature and pressure changes, and the trade-off between rate and yield are all standard Edexcel examination topics. In Edexcel-style questions, the command word "Suggest" appears frequently — use your chemistry knowledge to apply to an unfamiliar context.

💡 Exam Tips

🎯 Common Question Types:

  • "State the conditions" — name temperature, pressure, catalyst (3 marks)
  • "Explain why 450°C is used" — rate vs yield compromise (2 marks)
  • "Explain the effect of increasing pressure" — Le Chatelier + economic reason (2 marks)
  • "State one use of ammonia" — fertilisers (1 mark)

📝 Key Command Words:

  • State: Give a fact with no explanation needed
  • Explain: Give a reason — always address both rate AND equilibrium/yield in Haber questions
  • Describe: Give the key features of the process

⚠️ Common Mistakes to Avoid:

  • Saying "the catalyst increases yield" — it only increases rate
  • Forgetting to mention recycling of unreacted gases
  • Saying hydrogen comes from air — nitrogen comes from air, hydrogen from methane/natural gas
  • Not explaining WHY the compromise exists — just saying "450°C is a compromise" without explaining rate vs yield

Make this stick

Signing in gives access to all PrepWise features.

PrepWise is a trading name of A3M Quality Solutions Limited, registered in England and Wales, company number 14959172. Registered office: 202 Stroud Road, Gloucester, GL1 5LA. ICO registration ZC267069.