Test yourself on Extracting Metals with exam style questions, marked instantly.
Flashcards that come back just before you would forget them.
A revision plan that remembers what you know and shows what to do next.
See which topics you have nailed and which need another look.
Quiz yourself on Extracting MetalsGet your flashcardsBuild my revision planTrack my progress⛏️ Where Does Metal Come From?
Pick up a tin can, a copper wire, or an aluminium foil tray. Every single piece of metal you use started its life locked inside rock — bonded tightly to oxygen and other elements. Getting the metal out is called extraction, and the method we use depends on one crucial question: how reactive is the metal?
Think of reactivity as how tightly the metal grips oxygen. The more tightly it holds on, the harder it is to pull apart — and the more energy (or smarter chemistry) you need.
🔬 The Reactivity Series Decides the Method
The reactivity series ranks metals from most reactive (potassium) to least reactive (gold). Carbon sits roughly in the middle — below aluminium but above iron. This position is the key to extraction chemistry:
- Less reactive than carbon (e.g. iron, zinc, copper): can be extracted by carbon reduction — carbon 'steals' the oxygen from the metal oxide.
- More reactive than carbon (e.g. aluminium, sodium, calcium): carbon is not reactive enough to steal the oxygen. These metals must be extracted by electrolysis.
- Very unreactive metals (gold, platinum): found native (as the pure metal in rock), so no extraction needed.
🏭 Iron From Haematite — Carbon Reduction in the Blast Furnace
Haematite is the main ore of iron. Its formula is Fe₂O₃ (iron oxide). In the blast furnace, coke (a form of carbon) burns in hot air to produce carbon dioxide, which then reacts with more coke to form carbon monoxide. The carbon monoxide reduces the iron oxide:
🔬 The Blast Furnace — Click to Explore

⚡ Aluminium From Bauxite — Electrolysis
Aluminium is more reactive than carbon, so carbon reduction does not work. Instead, aluminium is extracted from its ore bauxite (aluminium oxide, Al₂O₃) by electrolysis.
Aluminium oxide has a very high melting point (~2050°C), making it expensive to melt for electrolysis. Cryolite is dissolved in to lower the melting point to around 970°C, saving significant energy costs.
During electrolysis of the molten aluminium oxide:
- Cathode (negative electrode): Al³⁺ ions gain electrons and are reduced to form aluminium metal. The aluminium sinks to the bottom and is tapped off.
- Anode (positive electrode): O²⁻ ions lose electrons and are oxidised to form oxygen gas. The oxygen reacts with the carbon anode at high temperatures, burning it away — so the anodes must be regularly replaced.
🌱 Alternative Methods: Bioleaching and Phytomining
Traditional mining damages the environment and low-grade ores (ores with only small amounts of metal) are uneconomical to smelt. Two sustainable alternatives exist:
- Bioleaching: Bacteria are used to leach (dissolve) copper compounds from low-grade copper ore. The bacteria convert insoluble copper compounds into copper sulfate solution. Copper is then displaced from the solution using scrap iron.
- Phytomining: Plants that absorb copper from the soil are grown on low-grade copper deposits. The plants are harvested and burned. The ash contains copper compounds which can be processed to obtain copper.
Both methods have lower environmental impact than traditional mining and smelting, but are slower.
⚖️ Extraction Method Summary
| Method | Used For | Example | Key Condition |
|---|---|---|---|
| Carbon reduction | Metals less reactive than carbon | Iron from haematite | Metal oxide + carbon → metal + CO₂ |
| Electrolysis | Metals more reactive than carbon | Aluminium from bauxite | Molten compound + electrical energy |
| Bioleaching | Low-grade copper ores | Copper extraction | Bacteria dissolve copper compounds |
| Phytomining | Low-grade copper deposits | Copper extraction | Plants absorb copper; ash processed |
📖 Key Terms
- Ore
- Rock containing enough metal compound to make extraction economically worthwhile.
- Reduction
- Loss of oxygen (or gain of electrons). Metal oxides are reduced during extraction to obtain the metal.
- Oxidation
- Gain of oxygen (or loss of electrons). The reducing agent is oxidised in the process.
- Electrolysis
- Breaking down a compound using electrical energy. Used for metals more reactive than carbon.
- Cryolite
- A compound added to aluminium oxide during electrolysis to lower its melting point, reducing energy costs.
- Bioleaching
- Using bacteria to extract metal compounds from low-grade ores.
- Phytomining
- Using plants that absorb metals from soil; plants are harvested and burned to obtain the metal from the ash.
📋 Key Facts
- Metals more reactive than carbon (e.g. Al, Na, Ca, K) must be extracted by electrolysis.
- Metals less reactive than carbon (e.g. Fe, Zn, Cu) can be extracted by carbon reduction.
- Gold is so unreactive it is found native — no extraction needed.
- Iron is extracted from haematite (Fe₂O₃) in a blast furnace.
- Aluminium is extracted from bauxite (Al₂O₃) dissolved in cryolite.
- Cryolite lowers the melting point of Al₂O₃ from ~2050°C to ~970°C, saving energy.
- At the cathode: Al³⁺ ions are reduced (gain electrons) → aluminium metal forms.
- At the anode: O²⁻ ions are oxidised (lose electrons) → oxygen gas forms; carbon anodes burn and must be replaced.
- Electrolysis uses more energy than carbon reduction, so aluminium is more expensive to produce than iron.
- Bioleaching and phytomining are used for low-grade copper ores with less environmental damage.
⚠️ Common Misconceptions
Misconception 1: "You can extract aluminium by heating with carbon"
Aluminium is more reactive than carbon, so carbon cannot reduce aluminium oxide. The carbon is not reactive enough to pull oxygen away from aluminium — electrolysis is required instead.
Misconception 2: "Cryolite is the ore of aluminium"
Cryolite is not the ore — bauxite (aluminium oxide, Al₂O₃) is the ore. Cryolite is added as a solvent to lower the melting point of aluminium oxide. Cryolite itself is now largely synthetic.
Misconception 3: "Oxidation means gaining oxygen, so the metal is oxidised during reduction"
The metal oxide is reduced (loses oxygen). The carbon or carbon monoxide is oxidised (gains oxygen). Students often confuse which substance is oxidised and which is reduced — remember: OIL RIG (Oxidation Is Loss, Reduction Is Gain — of electrons); or for oxygen: reduction = loss of oxygen.
🧠 Memory Aids
C-REX rule: If the metal is above Carbon in the REactivity series, use Electrolysis eXtraction.
Cathode/Anode for aluminium electrolysis:
- CAthode — Al³⁺ ions gain electrons: CAthode = CAtions reduced
- ANODE — O²⁻ ions lose electrons → oxygen; the anode burns away (replaced regularly)
Bio = bacteria; Phyto = plants — "phyto" is from Greek for plant (same root as photosynthesis).
🎯 Exam Connection
OCR A J248 frequency: Low priority (P3, weight 4.0) — typically 2–4 marks across Papers 3 and 4 (Higher Tier). Most likely appears as a short-answer or structured question.
Typical question types:
- "Explain why aluminium is extracted by electrolysis rather than by heating with carbon." (2–3 marks)
- "Explain the role of cryolite in the extraction of aluminium." (1–2 marks)
- "Describe what happens at the cathode and anode during the electrolysis of aluminium oxide." (2 marks)
- "Compare bioleaching and phytomining as methods of copper extraction." (2–3 marks)
- "Name the ore used to extract iron. Give the word equation for the reduction of iron oxide." (2 marks)
Edexcel 1CH0: Examined in Paper 1 (1CH0/1). Carbon reduction and reactivity series reasoning are tested; blast furnace reactions (including the role of coke, limestone, and hot air blast) are Paper 1 staples — Edexcel also tests sustainable extraction methods such as bioleaching and phytomining. In Edexcel-style questions, the command word "Suggest" appears frequently — use your chemistry knowledge to apply to an unfamiliar context.
💡 Exam Tips for Metal Extraction
🎯 Common Question Types:
- Explain why a method is used — always link back to position in reactivity series (2–3 marks)
- Describe electrode reactions — must state which electrode (cathode/anode) and what happens (2 marks)
- Compare sustainable methods — bioleaching vs phytomining (2–3 marks)
📝 Key Command Words:
- Explain — state the reason AND link to the concept (reactivity series position)
- Describe — state what happens at each electrode; say "reduced" or "oxidised"
- Compare — give a similarity AND a difference when asked to compare methods
⚠️ Common Mistakes to Avoid:
- Saying "cryolite is the ore" — it is the solvent; bauxite is the ore
- Not stating which electrode (cathode vs anode) when describing electrode reactions
- Confusing which substance is oxidised and which is reduced — use OIL RIG
- Forgetting that carbon anodes must be regularly replaced (they burn away in oxygen)
Make this stick
Signing in gives access to all PrepWise features.