Test yourself on States of Matter with exam style questions, marked instantly.
Flashcards that come back just before you would forget them.
A revision plan that remembers what you know and shows what to do next.
See which topics you have nailed and which need another look.
Quiz yourself on States of MatterGet your flashcardsBuild my revision planTrack my progress🧊 The Ice Cube in Your Drink
Drop an ice cube into a glass of water and watch what happens: a solid turns to a liquid, and eventually — if you leave the glass out long enough — the water disappears into the air as a gas. The same water molecules do all three. What changes is not the substance, but the arrangement of its particles and how they move. That is the entire story of states of matter, told in one glass.
Understanding this allows you to predict whether a substance will be a solid or a gas at room temperature, explain what happens at the flat sections on a heating curve, and write equations with the correct state symbols. These skills appear on almost every GCSE chemistry paper.
🧊 Particle Arrangements: Solid, Liquid and Gas

Figure 1: Particle arrangement in the three states of matter
🔬 Particle Behaviour in the Three States
The kinetic particle model describes matter as being made up of particles (atoms, molecules or ions) that are always moving. The state of a substance depends on how much energy the particles have and how strongly they attract each other.
Solid
Particles are close together in a regular, ordered arrangement. They are held strongly in position by forces of attraction and can only vibrate about fixed positions. A solid has a definite shape and a definite volume. It cannot be compressed because the particles are already touching.
Liquid
Particles are close together but in a random (irregular) arrangement. They have enough energy to move past each other and flow. A liquid has a definite volume (particles are still touching, so it cannot be compressed) but no fixed shape — it takes the shape of its container.
Gas
Particles are far apart and in a random arrangement. They move quickly in all directions with much more energy than in a liquid or solid. A gas has no fixed shape and no fixed volume — it fills its container completely. Gases can be compressed because there is a large amount of empty space between the particles.
Quick Check: A student says liquids and gases both have no fixed shape, but only a gas can be compressed. Are they correct?
Yes, correct. Both liquids and gases take the shape of their container, but only gases can be significantly compressed — liquid particles are too close together. Gases have large spaces between particles that can be reduced.
🔄 Changes of State
When a substance gains or loses energy, its particles can overcome or re-form the forces of attraction between them, causing a change of state. Changes of state are physical changes — no new substances are formed, and the process is reversible.
| Change of State | Direction | Energy Change |
|---|---|---|
| Melting | Solid → Liquid | Energy absorbed |
| Freezing | Liquid → Solid | Energy released |
| Evaporating / Boiling | Liquid → Gas | Energy absorbed |
| Condensing | Gas → Liquid | Energy released |
| Subliming | Solid → Gas | Energy absorbed |
| Depositing | Gas → Solid | Energy released |
State symbols in equations show the physical state of each substance:
- (s) = solid
- (l) = liquid
- (g) = gas
- (aq) = aqueous (dissolved in water)
Quick Check: Iodine crystals can turn directly from a solid to a purple gas when gently warmed. What is this process called?
Sublimation. Iodine sublimates — it goes directly from solid to gas without passing through a liquid stage. The reverse (gas directly to solid) is called deposition.
⚙️ Why Heating Curves Have Flat Sections
A heating curve plots temperature against time as a substance is heated steadily. The key feature is the flat section (plateau) at each change of state. Understanding why this happens is one of the most important mechanism questions in GCSE chemistry.
Temperature measures average kinetic energy. When particles speed up, temperature rises. During a change of state:
- Energy is being absorbed continuously (the substance is still being heated).
- But all of that energy goes into breaking the forces of attraction between particles — not into speeding them up.
- Because kinetic energy stays constant, temperature stays constant.
- Once all the substance has changed state, energy input starts increasing kinetic energy again and the temperature rises.
Key principle: During a change of state, energy is absorbed or released but temperature does not change — because the energy is changing potential energy (particle separation), not kinetic energy.
A full heating curve for a pure substance has three rising sections (solid warming, liquid warming, gas warming) and two flat plateaus (at the melting point and boiling point). Substances with stronger forces of attraction have longer plateaus because more energy is needed to break those forces.
⚖️ The Three States Compared
| Property | Solid | Liquid | Gas |
|---|---|---|---|
| Particle spacing | Very close | Very close | Far apart |
| Arrangement | Regular, ordered | Random | Random |
| Movement | Vibrate about fixed positions | Flow past each other | Move rapidly in all directions |
| Shape | Fixed | No (takes container shape) | No (fills container) |
| Volume | Fixed | Fixed | Not fixed |
| Compressible? | No | No | Yes |
| Energy level | Lowest | Medium | Highest |
📖 Key Definitions
- Kinetic particle model
- The model that explains the properties of solids, liquids and gases in terms of the arrangement and movement of particles.
- Change of state
- A physical change in which a substance changes from one state (solid, liquid, gas) to another. No new substances are formed.
- Melting point
- The temperature at which a substance changes from solid to liquid. It is the same temperature as the freezing point.
- Boiling point
- The temperature at which a substance changes from liquid to gas throughout its bulk.
- Sublimation
- The change of state directly from solid to gas without passing through a liquid stage.
- Forces of attraction
- The attractive forces between particles in a solid or liquid that hold them together. Stronger forces mean higher melting and boiling points.
📋 Key Facts
- Temperature is a measure of the average kinetic energy of the particles in a substance.
- During a change of state, temperature does not change — energy goes into breaking or forming forces of attraction.
- Gases can be compressed; solids and liquids cannot.
- The four state symbols are (s), (l), (g), (aq).
- Sublimation is solid → gas directly; deposition is gas → solid directly.
- Stronger forces of attraction → higher melting/boiling point.
- The kinetic particle model has limitations — it does not show forces between particles or the real size and internal structure of particles.
⚠️ Common Misconceptions
Misconception 1: "Steam is hotter than boiling water because it's a gas"
This is wrong. Steam at 100 °C and boiling water at 100 °C are at the same temperature — they have the same average kinetic energy. Steam does have more total energy, but this is stored as potential energy from breaking forces of attraction during boiling, not as kinetic energy. Temperature reflects kinetic energy, not the state of matter.
Misconception 2: "Temperature rises throughout heating — including during melting and boiling"
No. During melting and boiling, temperature stays constant. The energy supplied is used to break forces of attraction between particles, not to speed them up. The heating curve has flat plateaus precisely at these temperatures.
Misconception 3: "A liquid has no fixed volume because it takes the shape of its container"
Wrong. A liquid has a fixed volume but no fixed shape. The particles are still touching, so the volume stays constant — it just reshapes to fill the container from the bottom up. Only a gas fills the whole container and has no fixed volume.
🧠 Memory Aids
States of matter: "Solids Stay, Liquids Loosen, Gases Go"
- Solids Stay — fixed shape, fixed volume, particles stay put.
- Liquids Loosen — fixed volume but particles flow past each other, no fixed shape.
- Gases Go — particles shoot off in all directions, fill any space, compressible.
State symbols: "Some Ladies Go Aqua"
Some (s) — Ladies (l) — Go (g) — Aqua (aq)
Heating curve plateaus
Remember: flat = forces being broken. The plateau is not because nothing is happening — it is because all the energy is busy pulling particles apart (melting) or separating them completely (boiling).
🎯 Exam Focus
Frequency: High — states of matter questions appear in most OCR J248, AQA 8462 and Edexcel 1CH0 papers, typically worth 3–6 marks.
Typical question stems:
- "Describe the arrangement and movement of particles in a [solid/liquid/gas]." (3 marks)
- "Explain why the temperature does not change during melting." (3 marks)
- "Explain why substance A has a higher melting point than substance B." (3 marks)
- "Give two limitations of the simple particle model." (2 marks)
- "Use the kinetic particle model to explain the shape of the heating curve." (4–5 marks)
For full marks on explanation questions: You must use causal language — "because", "therefore", "which means". Simply listing facts without connecting them scores Level 1 only. Examiners are looking for a chain: cause → effect → outcome.
Edexcel 1CH0: Examined in Paper 1 (1CH0/1). Edexcel tests the particle model by asking students to describe arrangement and movement in each state and explain changes of state using energy and intermolecular forces. Limitations of the simple particle model (e.g., particles have volume; forces between particles) are frequently tested as 2-mark questions. In Edexcel-style questions, the command word "Suggest" appears frequently — use your chemistry knowledge to apply to an unfamiliar context.
💡 Exam Tips
🎯 Common Question Types:
- "Describe..." — 2–3 marks. Name the arrangement, spacing, and movement.
- "Explain..." — 3–4 marks. Give a cause-and-effect chain, not a list.
- "Evaluate a student's claim..." — 4 marks. Say whether correct or incorrect first, then explain fully.
📝 Key Command Words:
- State / Name — give the term only, no explanation needed.
- Describe — say what happens (use particle language).
- Explain — say what happens AND why (link to kinetic energy or forces).
- Evaluate — decide whether the claim is correct and back it up with reasoning.
⚠️ Common Mistakes to Avoid:
- Saying particles "stop" during a change of state — they never stop moving.
- Saying the flat plateau means "the temperature is constant because no energy is being added" — energy is still being added; it just goes into breaking forces.
- Confusing "no fixed shape" (liquid and gas) with "no fixed volume" (gas only).
- Writing "bonds break" without specifying "forces of attraction between particles" — at GCSE, be precise.
Make this stick
Signing in gives access to all PrepWise features.