Heat Transfer

Test yourself on Heat Transfer with exam style questions, marked instantly.

Flashcards that come back just before you would forget them.

A revision plan that remembers what you know and shows what to do next.

See which topics you have nailed and which need another look.

Quiz yourself on Heat TransferGet your flashcardsBuild my revision planTrack my progress

📖 Three Ways Heat Escapes

Your house is constantly losing heat — through the walls, roof, windows, and floor. But HOW does heat actually move? There are three different mechanisms: conduction (vibrating particles passing energy through solids), convection (hot fluid rising and cold fluid sinking), and radiation (infrared waves that don't need any particles at all). Understanding these helps explain everything from why metal spoons get hot to why the Sun can warm the Earth across 150 million km of empty space!
💡 Think of it like three ways to pass a ball...

Conduction is like passing hand-to-hand in a line — each person touches the next, energy passes along, but nobody moves from their spot. Convection is like a relay race — the carrier physically moves to deliver the energy. Radiation is like throwing the ball across an empty field — nothing in between, but energy still arrives at the destination!

🔥 CONDUCTION — Heat Through Solids

How it works:

  • Particles at the hot end vibrate MORE
  • They collide with neighbouring particles, passing on kinetic energy
  • Energy transfers from particle to particle through the material
  • Particles DON'T move position — just vibrate and pass energy along

Why metals are BEST conductors:

  • Metals have free electrons (delocalised electrons)
  • Free electrons can move through the metal structure
  • They carry kinetic energy MUCH faster than vibrations alone
  • This is why a metal spoon in hot tea heats up fast, but a wooden spoon doesn't

Insulators (poor conductors):

  • No free electrons — rely only on particle vibrations
  • Examples: wood, plastic, glass, air, wool
  • Trapped air is an excellent insulator (used in double glazing, cavity walls, loft insulation)

📊 Three Methods of Heat Transfer

Conduction: a metal rod held level in a stand with one end in a blue Bunsen flame, glowing yellow at the heated end, then red, then dark blue at the far end. Three arrows point along the rod away from the flame. The label says energy transfer.

Conduction: the particles at the hot end vibrate more and pass energy on to their neighbours, so energy travels along the rod from the hot end to the cold end.

Convection: a beaker of water with a Bunsen flame under its left side. A loop of arrows inside the water goes clockwise: hot water rises on the left, moves across the top, cold water sinks on the right and returns along the bottom. The labels say hot fluid rises and cold fluid sinks.

Convection: the fluid above the flame is heated, so it expands, becomes less dense and rises (orange arrows). At the surface it cools, becomes more dense and sinks (blue arrows). This makes a convection current.

Radiation: an electric heater with a glowing element on the left and a hand held up on the right. Four wavy arrows travel from the heater to the hand across the gap. The label says infrared waves.

Radiation: the heater gives out infrared waves. They cross the gap without any particles, so radiation can travel through a vacuum, which is how energy reaches us from the Sun.

Figure 1: The three methods of heat transfer. Conduction and convection need particles; radiation does not.

🔄 CONVECTION — Heat in Fluids

What it is: Heat transfer in liquids and gases by the MOVEMENT of the fluid itself.

How a convection current works:

  1. Fluid is heated → particles gain kinetic energy → move faster → spread out
  2. Heated fluid becomes LESS DENSE
  3. Less dense fluid RISES (floats up)
  4. Cooler, denser fluid sinks to take its place
  5. This cooler fluid gets heated and rises
  6. Creates a continuous circulation = convection current

Key point: Convection CANNOT happen in solids (particles can't move position) or in a vacuum (no particles at all).

☀️ RADIATION — Heat Without Particles

What it is: Transfer of energy by infrared (IR) waves — part of the electromagnetic spectrum.

Key facts:

  • Does NOT need particles — works through a vacuum
  • This is how the Sun heats the Earth (through space)
  • ALL objects emit AND absorb infrared radiation
  • Hotter objects emit MORE infrared radiation
  • Travels at the speed of light

Surfaces and radiation:

SurfaceAbsorbs IREmits IRReflects IR
Matt blackBEST absorberBEST emitterPoor reflector
Shiny silver/whitePoor absorberPoor emitterBEST reflector

Examples:

  • Black car in sun — absorbs more IR → gets hotter inside
  • White/silver car — reflects more IR → stays cooler
  • Rescue blankets (shiny) — reflect body heat back to keep you warm

⚙️ How It Works: Why Metals Conduct So Well

Metals are unique conductors because they contain delocalised (free) electrons — electrons that are not tied to a single atom but can move freely throughout the metal structure. When one end of a metal is heated, these electrons gain kinetic energy and rapidly travel through the metal, colliding with other electrons and atoms and transferring their energy.

This is much faster than the vibration-by-vibration mechanism in non-metals. In materials like plastic or wood, energy can only travel by one particle vibrating and bumping into its neighbour, like a very slow game of Chinese Whispers. In metals, the free electrons act as fast energy couriers, carrying energy quickly through the metal.

This is also why metals feel cold to the touch even at room temperature — they conduct your body heat away rapidly, creating a cooling sensation. A piece of wood at the same temperature feels warmer because it conducts heat away slowly.

📊 Comparing the Three Methods

SUMMARY: CONDUCTION vs CONVECTION vs RADIATION

PropertyCONDUCTIONCONVECTIONRADIATION
Works inMainly SOLIDS (best in metals)LIQUIDS & GASES (fluids only)ALL states + VACUUM
How it worksVibrations pass particle to particle (+free electrons in metals)Hot fluid rises, cold fluid sinks (density change)Infrared EM waves travel (no particles needed)
Particles move?NO (vibrate in position)YES (whole fluid moves)NO particles involved
ExampleMetal spoon in hot drinkHot air balloon risingSun warming the Earth

📊 Infrared Thermogram: Visualising Heat Loss

HOW IT WORKS: Infrared cameras detect thermal radiation (heat). Warmer objects emit more infrared, appearing red/yellow. This reveals where homes lose heat — helping identify where insulation is needed.

🏠 Reducing Heat Loss in Buildings

MethodHow it worksWhat it reduces
Loft insulationFibreglass/wool traps air pocketsConduction & convection through roof
Cavity wall insulationFoam/wool fills gap in wallsConduction & convection through walls
Double glazingTwo panes with air/argon gapConduction through windows
Draught excludersSeals gaps around doors/windowsConvection (stops hot air escaping)
Reflective foilShiny surface behind radiatorsRadiation (reflects heat into room)
Thick curtainsTraps air layer at windowConduction & convection

💡 Key principle: Trapped air is an excellent insulator because it's a poor conductor AND can't form large convection currents when trapped in small pockets.

🔬 REQUIRED PRACTICAL: Investigating Thermal Insulation

Aim: Compare the effectiveness of different insulating materials

Equipment: Beakers, hot water, thermometers, insulating materials (bubble wrap, felt, foil, etc.), stopwatch, lids

Method:

  1. Wrap identical beakers with different insulating materials
  2. Add same volume of hot water at same starting temperature to each
  3. Put lids on (to reduce evaporation and convection)
  4. Record temperature every minute for 10-15 minutes
  5. Plot cooling curves (temperature vs time)
  6. Best insulator = slowest temperature drop

Control variables:

  • Same volume of water
  • Same starting temperature
  • Same thickness of insulation
  • Same beaker type
  • Same room temperature

Quick Check: A thermos flask has a vacuum between its inner and outer walls. Which method(s) of heat transfer does the vacuum prevent?

📖 Key Definitions

Conduction: The transfer of thermal energy through a material by particle vibrations. Best in metals due to free electrons. No bulk movement of particles.

Convection: The transfer of thermal energy in fluids (liquids and gases) by the movement of the fluid itself. Hot fluid rises (less dense), cool fluid sinks.

Radiation: The transfer of thermal energy by infrared electromagnetic waves. Does not require a medium — works through a vacuum. All objects emit and absorb radiation.

Free electrons: Electrons in metals that are not bonded to individual atoms but move freely through the metallic structure. They are responsible for metals' excellent electrical and thermal conductivity.

Convection current: The circular flow of fluid created when heated fluid rises and cool fluid sinks to replace it, creating a continuous cycle of heat transfer.

⚠️ Common Misconceptions

Misconception 1: "Convection happens in all states of matter"

Convection only occurs in fluids (liquids and gases) where particles can move freely. In a solid, particles are fixed in their lattice positions and cannot flow. Convection in a solid is impossible. Heat in solids transfers only by conduction.

Misconception 2: "Radiation requires a medium to travel"

Unlike conduction and convection, radiation is an electromagnetic wave — it does not need particles to carry it. Radiation can travel through a complete vacuum. This is how the Sun's energy reaches Earth across 150 million km of empty space. Any object with a temperature above absolute zero emits radiation.

Misconception 3: "White surfaces reflect heat better than black surfaces"

For infrared (thermal) radiation, the colour of a surface matters less than its texture. A dull, matt black surface is the best absorber AND best emitter of infrared radiation. A shiny, silvered surface is the best reflector and worst emitter. A white surface reflects visible light well but does not necessarily reflect infrared well — the surface finish (matt vs shiny) matters more than colour for IR.

🧠 Memory Aid: The Three Methods

Remember the three methods with: CCR — Conduction, Convection, Radiation

To remember what each one needs: "Conduction needs Contact (particle to particle), Convection needs Currents (fluid moves), Radiation needs Nothing (works in vacuum)"

Black body memory: "Black absorbs, Black emits" — both absorption and emission are maximised by black, matt surfaces.

🎓 Higher Tier Only: Rate of Heat Transfer

The rate of heat transfer by conduction depends on:

  • Temperature difference — greater difference = faster transfer
  • Thickness of material — thicker = slower transfer
  • Thermal conductivity — a property of the material (metals have high conductivity)
  • Surface area — larger area = faster transfer

For radiation, the hotter an object is, the more infrared radiation it emits each second. Even a small rise in temperature can cause a large increase in the radiation emitted.

🎯 Exam Focus

Frequently Examined

This topic is on all four boards (AQA, Edexcel, OCR A and OCR B). The question types below are worth practising.

This topic is examined in Edexcel 1PH0/1 (Paper 1). Edexcel questions tend to set this topic in an applied context — home insulation, building design, or everyday objects — and ask you to "suggest" which method of heat transfer is most relevant and justify your answer. Heat transfer is a core topic that links to everyday applications. Common question types:

  • Describe and explain how each method works (3-4 mark describe questions)
  • Explain which method applies in a given situation (e.g., "explain how a room radiator heats a room" — mainly convection, despite the name)
  • Evaluate insulation methods for a house — which method does each address?
  • Required practical: describe method, identify controls, explain why best insulator = slowest cooling

The most common mistake: confusing which methods work in solids vs fluids vs vacuum. Only radiation works in a vacuum. Convection only works in fluids.

💡 Exam Tips for Heat Transfer

🎯 Common Question Types:

  • Describe how energy transfers from a hot object to its surroundings (3-4 marks)
  • Explain why metals are better conductors than non-metals (2-3 marks — free electrons!)
  • Explain a convection current step by step (3-4 marks)
  • Describe improvements to the insulation practical (3 marks)

📝 Key Command Words:

  • Describe: State what happens step by step (for convection: heat → expand → rise → cool → sink)
  • Explain: Give the reason WHY (free electrons, density change, IR waves)
  • Compare: State which method is faster/more efficient and why

⚠️ Common Mistakes to Avoid:

  • Saying convection occurs in solids — it cannot!
  • Forgetting to mention density change when explaining convection
  • Saying radiation "heats the air" — radiation passes through air and heats surfaces
  • Ignoring that metals have free electrons in conduction questions

Quick Check: Explain why cavity wall insulation reduces heat loss from a house.

Make this stick

Signing in gives access to all PrepWise features.

PrepWise is a trading name of A3M Quality Solutions Limited, registered in England and Wales, company number 14959172. Registered office: 202 Stroud Road, Gloucester, GL1 5LA. ICO registration ZC267069.