Pressure

Test yourself on Pressure with exam style questions, marked instantly.

Flashcards that come back just before you would forget them.

A revision plan that remembers what you know and shows what to do next.

See which topics you have nailed and which need another look.

Quiz yourself on PressureGet your flashcardsBuild my revision planTrack my progress

💪 The Stiletto That Sank Into the Lawn

At a garden party, a person wearing stiletto heels steps onto the grass and immediately sinks in. Their friend in snowshoes strolls across without leaving a mark. Both people weigh exactly the same. The difference? Pressure. It's not just about how hard you push — it's about how much area you spread that force across. A stiletto heel concentrates all your weight onto roughly 1 cm² of ground. A snowshoe spreads it over 2000 cm². Same force, tiny area = enormous pressure. That's the whole idea.

⚖️ What Is Pressure? The P = F/A Equation

Pressure is the force acting per unit area on a surface. It tells us how concentrated a force is — a large force on a small area causes far more damage than the same force spread over a wide area.

P = F / A
Pressure (Pa) = Force (N) ÷ Area (m²)
  • Pressure is measured in Pascals (Pa), where 1 Pa = 1 N/m²
  • Force is measured in Newtons (N)
  • Area is measured in square metres (m²)
  • You can rearrange to find F = P × A or A = F / P

The equation explains everyday design decisions: knives have thin sharp edges (tiny area = high pressure to cut), drawing pins have a flat head (large area = low pressure on your thumb) and a sharp point (tiny area = high pressure to pierce).

🌊 Pressure in Fluids (Liquids and Gases)

A fluid is any substance that can flow — this includes both liquids and gases. Pressure in a fluid behaves differently from pressure on a solid surface. There are three key rules:

  • Fluids exert pressure in ALL directions — not just downward. A submarine at depth has water pressing in on it from all sides, not just from above.
  • Pressure increases with depth — the deeper you go, the greater the weight of fluid above you.
  • Pressure at a given depth is the same in all directions at that point.

The formula for pressure due to a column of liquid is:

P = h ρ g
Pressure (Pa) = depth (m) × density (kg/m³) × gravitational field strength (N/kg)

Where h = depth below the surface, ρ (rho) = density of the liquid, and g = 9.8 N/kg on Earth. This is a Higher equation.

🌬️ Atmospheric Pressure

The atmosphere is a layer of gas surrounding the Earth. All that gas has weight, and that weight pushes down on everything at the surface — this is atmospheric pressure.

  • At sea level, atmospheric pressure is approximately 101,000 Pa (101 kPa)
  • Atmospheric pressure decreases with altitude — as you go higher, there is less air above you, so the weight of air pushing down is smaller
  • This is why aircraft cabins are pressurised and why mountaineers can struggle to breathe at altitude
  • At the top of Mount Everest (~8,800 m), atmospheric pressure is only about one-third of sea level pressure

🧭 Pressure Diagrams

Two identical blocks stand on the floor, one on its small end and one lying flat. A downward 50 N force acts on the top of each. The standing block has a contact area of 0.01 square metres, shown by a short bar on the floor, and the flat block 0.05 square metres, shown by a bar five times longer.

Figure 1: The same 50 N block pressing on the floor. Standing on its end the area is 0.01 m², so p = 50 ÷ 0.01 = 5000 Pa. Lying flat the area is 0.05 m², so p = 50 ÷ 0.05 = 1000 Pa.

A tank of water with a depth arrow pointing down. At three levels, labelled shallow, middle and deep, four equal arrows point up, down, left and right. The arrows are longer at greater depth.

Figure 2: Pressure in a liquid acts in all directions and increases with depth (arrow lengths drawn to depth).

⚙️ Why Fluid Pressure Acts in All Directions

To understand why fluid pressure acts in all directions, think about what a fluid is made of: billions of tiny particles (atoms or molecules) moving randomly at high speed.

  • These particles collide with any surface they encounter — walls of a container, the hull of a ship, your eardrums
  • Because they move randomly in all directions, they exert force on every surface they touch, regardless of which way that surface faces
  • Deeper in a fluid, there are more particles above — the weight of the fluid column above that point adds to the pressure. This is why P = hρg: a taller column (bigger h) of denser fluid (bigger ρ) exerts greater pressure
  • This is also why a balloon underwater gets squeezed from all sides — the pressure pushes inward from every direction simultaneously

Quick Check: A force of 200 N acts on an area of 0.05 m². What is the pressure?

⚖️ High Pressure vs Low Pressure — Design Choices

Object Design Effect Why?
Sharp knife Tiny blade edge (small area) Very high pressure Cuts food easily
Blunt knife Wide edge (large area) Low pressure Fails to cut — pushes rather than slices
Snowshoes Very wide (large area) Very low pressure Spreads weight, stops sinking into snow
Stiletto heel Very narrow point (tiny area) Very high pressure Sinks into soft surfaces
Drawing pin (thumb side) Wide flat head (large area) Low pressure Comfortable to push with your thumb
Drawing pin (wall side) Sharp narrow point (tiny area) High pressure Pierces the wall/board easily
Tractor tyre Very wide (large area) Low pressure Doesn't sink into mud in fields

📖 Key Terms

Pressure
The force acting per unit area on a surface. Measured in Pascals (Pa). Formula: P = F/A.
Pascal (Pa)
The SI unit of pressure. 1 Pa = 1 Newton per square metre (1 N/m²). Atmospheric pressure at sea level is approximately 101,000 Pa.
Fluid
Any substance that can flow — includes both liquids and gases. Fluids exert pressure in all directions.
Upthrust
The net upward force that a fluid exerts on a submerged or partially submerged object. Caused by pressure being greater at the bottom of the object than at the top.
Atmospheric pressure
The pressure exerted by the weight of the atmosphere pressing down on Earth's surface. Decreases with altitude. About 101,000 Pa at sea level.
Density (ρ)
Mass per unit volume (kg/m³). Denser fluids create greater pressure at a given depth.

📋 Key Equations and Relationships

  • P = F / A — Pressure equals force divided by area (all students)
  • F = P × A — Force equals pressure times area (rearrangement)
  • A = F / P — Area equals force divided by pressure (rearrangement)
  • P = hρg — Pressure in a liquid (Higher tier only)
  • Pressure increases when: force increases OR area decreases
  • Pressure decreases when: force decreases OR area increases
  • Fluid pressure: acts in all directions, increases with depth, increases with density of fluid
  • Atmospheric pressure: decreases with altitude because less air is above
  • Upthrust occurs because pressure at the bottom of a submerged object is greater than at the top

🧮 Worked Examples

Example 1: Finding Pressure (P = F/A)

A person has a weight of 600 N. Their two feet have a total contact area of 0.030 m².
Calculate the pressure exerted on the floor.

Write the formula: P = F / A
Substitute: P = 600 / 0.030
Answer: P = 20,000 Pa

Example 2: Finding Force (F = P × A)

The air pressure on a window is 101,000 Pa. The window has an area of 2.0 m².
Calculate the force exerted by the air on the window.

Write the formula: F = P × A
Substitute: F = 101,000 × 2.0
Answer: F = 202,000 N (about 202 kN — this is why windows must be strong!)

Example 3: Pressure in a Liquid — P = hρg (Higher Tier)

A diver descends to a depth of 20 m in seawater. Density of seawater = 1025 kg/m³, g = 9.8 N/kg.
Calculate the pressure due to the seawater at that depth.

Write the formula: P = hρg
Substitute: P = 20 × 1025 × 9.8
Answer: P = 200,900 Pa ≈ 201 kPa

Note: total pressure on the diver also includes atmospheric pressure (101 kPa) on top.

Quick Check: Explain why a sharp knife cuts more easily than a blunt knife, even when the same force is applied.

⚠️ Common Misconceptions

Misconception 1: "Pressure only acts downward in a fluid"

Pressure in a fluid acts in ALL directions — upward, sideways, and downward. This is why a submarine's hull must withstand pressure from every angle. The pressure at a given depth is equal in all directions at that point. Many students only think of pressure as "pushing down".

Misconception 2: "A heavier object always exerts more pressure"

Not necessarily. Pressure depends on BOTH force AND area (P = F/A). A heavy person wearing snowshoes may exert less pressure than a lighter person in stiletto heels. A greater weight (force) spread over a much larger area can give a lower pressure than a small weight concentrated on a tiny area.

Misconception 3: "Atmospheric pressure is the same everywhere"

Atmospheric pressure decreases with altitude. At the top of a mountain there is less air above than at sea level, so less weight of air pressing down, so lower atmospheric pressure. This is why aircraft are pressurised and why your ears "pop" when ascending or descending rapidly.

🧠 Memory Aids

The Pressure Triangle

Draw a triangle with P at the top, F on the bottom-left, and A on the bottom-right. Cover what you want to find:

  • Cover P: F over A → P = F / A
  • Cover F: P times A → F = P × A
  • Cover A: F over P → A = F / P

Remembering the units

"1 Pa = 1 N on 1 m²" — one Pascal is one Newton of force spread over one square metre. The unit name honours Blaise Pascal, the 17th-century French mathematician who studied fluid pressure.

P = hρg — "Here Rho Goes"

The letters in P = hρg can be remembered as Here Rho Goes (h, ρ, g) — depth times density times gravity. The word "rho" (ρ) is the Greek letter for density.

Atmospheric pressure and altitude

"Higher up = less air above = lower pressure." Think of it as a pile of air pressing down on you. The higher you climb, the less of the pile is above your head.

🎓 Higher Tier: P = hρg and Upthrust

The P = hρg Formula in Detail

For a column of liquid of depth h, density ρ, and gravitational field strength g:

P = hρg
P (Pa) = h (m) × ρ (kg/m³) × g (N/kg)
  • Deeper depth (h) → greater pressure (more liquid above)
  • Denser liquid (ρ) → greater pressure at same depth (mercury exerts far more pressure than water)
  • Greater g (e.g. on Jupiter) → greater pressure (more gravitational pull on each layer)

Upthrust

When an object is submerged in a fluid, the pressure at the bottom of the object is greater than the pressure at the top (because the bottom is deeper). This pressure difference creates a net upward force called upthrust.

  • Upthrust = weight of fluid displaced by the object (Archimedes' principle)
  • If upthrust > weight of object: the object rises
  • If upthrust < weight of object: the object sinks
  • If upthrust = weight of object: the forces balance, so the object floats (or hovers, like a submarine)

This is why ships float: they are shaped to displace enough water that the upthrust equals the ship's total weight.

Higher Tier Worked Example

A water storage tank is filled to a depth of 5.0 m. Water density = 1000 kg/m³, g = 9.8 N/kg.
Find the pressure at the bottom of the tank due to the water.

P = hρg = 5.0 × 1000 × 9.8 = 49,000 Pa

Quick Check: Why does atmospheric pressure decrease with altitude?

🎯 Exam Focus

Frequency: Pressure calculations and explanations are common questions in GCSE Physics, so this topic is worth practising.

Typical Question Types:

  • "Calculate the pressure exerted by..." — P = F/A calculation (2-3 marks)
  • "Explain why a sharp knife cuts more easily than a blunt one" (3-4 marks) — must use P = F/A reasoning
  • "Explain why pressure in a liquid increases with depth" (2-3 marks)
  • "Why does atmospheric pressure decrease with altitude?" (2 marks)
  • "Explain what is meant by upthrust" (2 marks — Higher)
  • P = hρg calculations (Higher Tier, 3 marks)

What Examiners Look For:

  • For "explain why sharp knife" questions: must name both area being smaller AND pressure being greater, and link using P = F/A
  • For fluid pressure questions: must state "acts in all directions" not just downward
  • For atmospheric pressure: "less air above" is the key phrase — depth argument but for air not water
  • Always state units in calculations: Pa not just a number

💡 Exam Tips for Pressure

🎯 Common Question Types:

  • P = F/A calculation: "Calculate the pressure exerted by..." (2-3 marks)
  • Rearrangement: "Calculate the force / area if pressure is..." (3 marks)
  • "Explain why" questions about sharp knives, snowshoes, stilettos (3-4 marks)
  • Fluid pressure: "Explain why pressure increases with depth" (2-3 marks)
  • Atmospheric pressure: "Why does pressure decrease with altitude?" (2 marks)
  • Higher: P = hρg calculations, upthrust explanations

📝 Key Command Words:

  • Calculate — show the formula, substitute values, give units
  • Explain why — link cause to effect using the equation (e.g. smaller area → greater pressure)
  • State — brief answer, no explanation needed (e.g. "pressure acts in all directions")
  • Describe — explain what happens, include direction of change

⚠️ Common Mistakes to Avoid:

  • Writing the formula as P = F × A (wrong — it's F divided by A)
  • Forgetting units — always write Pa for pressure in final answers
  • Saying fluid pressure only acts "downward" — it acts in ALL directions
  • Not linking "smaller area → greater pressure" explicitly in explanation questions
  • Using cm² instead of m² in calculations without converting first (1 m² = 10,000 cm²)

Make this stick

Signing in gives access to all PrepWise features.

PrepWise is a trading name of A3M Quality Solutions Limited, registered in England and Wales, company number 14959172. Registered office: 202 Stroud Road, Gloucester, GL1 5LA. ICO registration ZC267069.