Test yourself on States of Matter with exam style questions, marked instantly.
Flashcards that come back just before you would forget them.
A revision plan that remembers what you know and shows what to do next.
See which topics you have nailed and which need another look.
Quiz yourself on States of MatterGet your flashcardsBuild my revision planTrack my progress📖 The Temperature That Refuses to Rise
📊 Particle Arrangement in Three States

Figure 1: Particle arrangement and movement in solid, liquid, and gas states.
🔬 The Three States of Matter Compared
All matter is made of particles (atoms or molecules). The state depends on how much energy those particles have and how strongly they are attracted to each other:
- Solid: Particles are held in fixed positions in a regular lattice. They vibrate about fixed points but cannot move past each other. Strong forces of attraction hold them in place. Fixed shape and volume.
- Liquid: Particles are close together but can move past each other. Forces are weaker than in solids. No fixed shape (takes container shape) but fixed volume.
- Gas: Particles have broken free — they move randomly at high speed with large spaces between them. Very weak/negligible forces. No fixed shape or volume — fills any container.
🔬 Deep Dive: Why Temperature Stays Constant During State Changes
Imagine particles as prisoners trying to escape. In a solid, they're locked in cells (fixed positions). The energy you add first makes them rattle their bars harder (temperature rises). But to actually ESCAPE, they need extra energy to break the locks (bonds).
During melting, all the energy goes into breaking locks — no energy left over to make them move faster. Once everyone's free (all melted), extra energy makes them run faster (temperature rises again).
The technical explanation:
- Temperature = average KINETIC energy of particles
- During state change, energy increases POTENTIAL energy (bond breaking/forming)
- Kinetic energy stays constant → temperature stays constant
- Once state change complete, kinetic energy can increase again
📊 Heating Curve for Water
KEY INSIGHT: FLAT sections = state change (energy breaks/forms bonds, temperature constant). SLOPED sections = heating within same state (energy increases particle speed, temperature rises).
📚 The Six Changes of State
| Change | From → To | Energy | Bonds |
|---|---|---|---|
| Melting | Solid → Liquid | IN (absorbed) | Breaking |
| Freezing | Liquid → Solid | OUT (released) | Forming |
| Boiling/Evaporating | Liquid → Gas | IN (absorbed) | Breaking |
| Condensing | Gas → Liquid | OUT (released) | Forming |
| Sublimation | Solid → Gas | IN (absorbed) | Breaking |
| Deposition | Gas → Solid | OUT (released) | Forming |
Key insight: Energy IN = bonds breaking; Energy OUT = bonds forming
Quick Check: When water boils at 100°C, what is happening to the energy supplied and why does the temperature not rise above 100°C during boiling?
The energy supplied is being used to break bonds between water molecules (increasing potential energy), not to increase their speed (kinetic energy). Since temperature depends on kinetic energy only, it stays constant at 100°C until all liquid has vaporised.
⚙️ How Internal Energy Changes During Heating
The internal energy of a substance is the total kinetic and potential energy of all its particles.
- Heating a solid below its melting point: Kinetic energy increases → particles vibrate more → temperature rises.
- At the melting point: Energy goes into potential energy (breaking bonds) → kinetic energy constant → temperature constant.
- Heating the liquid: Kinetic energy increases again → temperature rises.
- At the boiling point: Energy goes into potential energy (completely separating particles) → temperature stays constant.
- Heating the gas: Kinetic energy increases → temperature rises.
So internal energy increases throughout — but whether that increase shows as higher temperature depends on whether particles are changing state or just moving faster.
📖 Key Definitions
Melting point: The temperature at which a solid changes to a liquid. Temperature stays constant during melting as energy breaks intermolecular bonds.
Boiling point: The temperature at which a liquid changes to a gas throughout the bulk liquid. Temperature stays constant during boiling.
Internal energy: The total kinetic and potential energy of all the particles in a substance.
Latent heat: The energy needed to change state without changing temperature. It goes into breaking or forming bonds (changing potential energy).
Evaporation: A surface process where higher-energy particles escape from a liquid below its boiling point. Distinct from boiling (which happens throughout the liquid).
Sublimation: A direct change from solid to gas without passing through the liquid state (e.g. dry ice / frozen CO₂).
⚠️ Common Misconceptions
Misconception 1: "The temperature rises during melting/boiling"
This is the most common error. During any state change, temperature stays CONSTANT. All the energy supplied goes into breaking bonds (potential energy), not into making particles move faster (kinetic energy). Examiners test this directly — always state that energy increases potential energy, not kinetic energy.
Misconception 2: "Gases are weightless/have no mass"
Mass is always conserved during state changes! The same number of molecules exists in steam as in liquid water — they are just much further apart. Steam weighs the same as the water it came from.
Misconception 3: "Evaporation and boiling are the same thing"
Evaporation happens at the surface of a liquid at any temperature (e.g. puddles drying on a cool day). Boiling occurs throughout the entire liquid and only at the boiling point. Both convert liquid to gas, but the mechanism and temperature are different.
Quick Check: Describe the difference between the arrangement and movement of particles in a liquid compared to a solid.
In a solid, particles are held in fixed positions in a regular lattice and can only vibrate. In a liquid, particles are still close together but are no longer in fixed positions — they can move past each other and flow. Liquids have weaker intermolecular forces than solids.
🧠 Memory Aid
The six state changes — remember "MBSCE-D":
- Melting (solid → liquid, energy IN)
- Boiling/evaporation (liquid → gas, energy IN)
- Sublimation (solid → gas, energy IN)
- Condensation (gas → liquid, energy OUT)
- E... wait — reverse: Freezing (liquid → solid, energy OUT)
- Deposition (gas → solid, energy OUT)
Energy rule: Going UP the states (solid → liquid → gas) = energy IN (breaking bonds). Going DOWN (gas → liquid → solid) = energy OUT (forming bonds).
Temperature during state change: Think of a traffic jam — cars (energy) keep arriving but the queue (temperature) doesn't move until the bottleneck (bond-breaking) clears.
🎯 Exam Focus
Exam Favourite
This topic is on all four boards (AQA, Edexcel, OCR A and OCR B). The question types below are worth practising.
Examined in Edexcel 1PH0/2 (Paper 2). Edexcel uses context-based questions — unusual substances, industrial processes, materials with surprising properties — so practise applying particle model reasoning to unfamiliar state-change scenarios.
- "Explain why the temperature stays constant during melting" (3 marks): Say energy breaks bonds → potential energy increases → kinetic energy stays constant → temperature stays constant.
- Heating curve interpretation (2-3 marks): Identify flat sections (state changes) and sloped sections (within-state heating). Label the melting and boiling points.
- Particle descriptions (3 marks): Describe arrangement, movement, and forces for each state. Always address all three aspects.
- Internal energy questions (2 marks): State that internal energy = kinetic + potential energy of particles.
- "Suggest" questions (Edexcel): Given an unusual state change (e.g. a substance that sublimes at room temperature), suggest why this happens using particle model reasoning.
💡 Exam Tips for States of Matter
🎯 Common Question Types:
- Explain flat sections on a heating curve (3 marks)
- Describe particle arrangement in each state (3 marks)
- State what happens to energy during a state change (2 marks)
- Identify changes of state from a temperature-time graph
📝 Key Command Words:
- Explain: Must link energy → bond breaking → kinetic energy constant → temperature constant
- Describe: Give particle arrangement AND movement AND forces
- State: Name the change of state or say energy in/out
- Compare: Give both similarities and differences between states
⚠️ Common Mistakes to Avoid:
- Saying "energy is lost" during state changes — energy is never lost, just transferred to potential energy
- Forgetting to say temperature is CONSTANT during state changes (not "it doesn't change much")
- Confusing internal energy with temperature — they are not the same thing
- Mass is CONSERVED — steam isn't lighter than water, just more spread out
Quick Check: On a heating curve, what does a flat (horizontal) section represent? What is happening to the energy during this section?
A flat section represents a state change (either melting or boiling). Energy being supplied is breaking bonds between particles, increasing potential energy. Kinetic energy stays constant, so temperature stays constant.
Make this stick
Signing in gives access to all PrepWise features.