Radioactive Decay

Test yourself on Radioactive Decay with exam style questions, marked instantly.

Flashcards that come back just before you would forget them.

A revision plan that remembers what you know and shows what to do next.

See which topics you have nailed and which need another look.

Quiz yourself on Radioactive DecayGet your flashcardsBuild my revision planTrack my progress

βš›οΈ Unstable Nuclei

Some atomic nuclei are unstable β€” they have the wrong balance of protons and neutrons, or simply too much energy. These nuclei will spontaneously "decay" by emitting particles or energy to become more stable. You can't predict WHEN a specific nucleus will decay (it's completely random!), but you can predict how many from a large sample will decay. This is radioactivity β€” discovered accidentally by Henri Becquerel in 1896 when uranium fogged his photographic plates!

πŸ”¬ The Three Types of Radiation

There are three main types of nuclear radiation, each with very different properties. They differ in what they are made of, how far they travel, and how much they ionise surrounding material.

Alpha (Ξ±) particles are the largest β€” they consist of 2 protons and 2 neutrons (identical to a helium-4 nucleus). Because they are large and carry a +2 charge, they interact heavily with surrounding atoms, losing energy quickly. This makes them the most ionising but least penetrating type.

Beta (Ξ²) particles are high-speed electrons emitted from the nucleus when a neutron turns into a proton. They are much smaller and faster than alpha particles, so they travel further and are less ionising.

Gamma (Ξ³) rays are high-energy electromagnetic radiation with no mass and no charge. They pass through most materials easily, making them the most penetrating and least ionising type.

Quick Check: Which type of radiation is most ionising and why?

πŸ“Š Penetrating Power of the Three Radiations

A radioactive source on the left sends alpha, beta and gamma radiation towards a sheet of paper, a sheet of aluminium and a block of lead. The alpha arrow stops at the paper. The beta arrow passes the paper and stops at the aluminium. The gamma arrow passes through the paper and the aluminium and leaves the lead block weaker.

Figure 1 (not to scale): Alpha is stopped by a sheet of paper or a few centimetres of air. Beta passes through paper but is stopped by a few millimetres of aluminium. Gamma is only reduced, by several centimetres of lead or thick concrete.

KEY RELATIONSHIP: High ionising power = Low penetrating power. Alpha particles lose energy quickly by ionising many atoms, so they don't travel far. Gamma rays ionise fewer atoms, so they penetrate further.

πŸ“š What Happens in Each Decay

ALPHA DECAY (Ξ±):

  • Nucleus emits an alpha particle (2 protons + 2 neutrons)
  • Mass number decreases by 4
  • Atomic number decreases by 2
  • Element CHANGES (2 fewer protons = different element)

Example: Β²Β²βΆβ‚ˆβ‚ˆRa β†’ Β²Β²Β²β‚ˆβ‚†Rn + ⁴₂α

BETA DECAY (Ξ²):

  • A neutron turns into a proton (and emits an electron)
  • Mass number stays the SAME
  • Atomic number increases by 1
  • Element CHANGES (one more proton)

Example: ¹⁴₆C β†’ ¹⁴₇N + ⁰₋₁β

GAMMA EMISSION (Ξ³):

  • Nucleus releases excess energy as gamma ray
  • Mass number stays the SAME
  • Atomic number stays the SAME
  • Element does NOT change (just loses energy)
  • Often follows alpha or beta decay

Quick Check: In beta decay, the mass number stays the same. Why?

πŸ“Š Nuclear Decay Equations

A nucleus of red protons and grey neutrons on the left, and an alpha particle on the right made of two red protons and two grey neutrons, with a faint trail joining them. The labels say nucleus and alpha particle.

Alpha decay: the nucleus gives out an alpha particle, which is two protons and two neutrons. Red balls are protons and grey balls are neutrons.

²³⁸₉₂U β†’ ²³⁴₉₀Th + ⁴₂He
Mass numbers: 238 = 234 + 4. Atomic numbers: 92 = 90 + 2.
A nucleus of red protons and grey neutrons on the left, and one small blue ball leaving to the right along a thin trail. The blue ball is a beta particle, which is an electron. The labels say nucleus and beta particle.

Beta decay: a neutron in the nucleus turns into a proton and a fast electron leaves. A beta particle is an electron.

¹⁴₆C β†’ ¹⁴₇N + ⁰₋₁e
Mass numbers: 14 = 14 + 0. Atomic numbers: 6 = 7 + (βˆ’1).

Gamma emission: the nucleus gives out energy as a gamma ray. The mass number and the atomic number do not change.

Figure 2: Balancing nuclear equations: mass numbers and atomic numbers must balance on both sides.

BALANCING TIP: Add up mass numbers on both sides (must be equal). Add up atomic numbers on both sides (must be equal). The alpha particle is ⁴₂He, the beta particle is ⁰₋₁e.

βš™οΈ How It Works: The Mechanism of Each Decay

Alpha decay occurs in very large, heavy nuclei (like uranium). The nucleus is so large that the attraction between its particles cannot hold it together effectively. Emitting an alpha particle (helium-4 nucleus) reduces the size of the nucleus significantly, making the remaining nucleus more stable.

Beta decay occurs when a nucleus has too many neutrons relative to its protons. A neutron changes into a proton and an electron. The electron leaves the nucleus as the beta particle and carries away the excess energy.

Gamma emission occurs when a nucleus is in an excited energy state after alpha or beta decay. The nucleus releases this excess energy as a gamma ray. The mass number and atomic number do not change. The nucleus simply loses energy.

βš–οΈ Comparing Alpha, Beta, and Gamma Radiation

PropertyAlpha (Ξ±)Beta (Ξ²)Gamma (Ξ³)
Nature2p + 2n (He-4 nucleus)Fast electronElectromagnetic wave
Charge+2βˆ’10
Mass4 u~00
Range in airFew cm~1 mUnlimited (reduced)
Stopped byPaper, skinFew mm aluminiumThick lead / concrete
Ionising powerHighMediumLow
SpeedSlow (~0.05c)Fast (~0.9c)c (speed of light)

πŸ“– Key Definitions

Radioactive decay: The spontaneous, random emission of radiation from an unstable nucleus as it becomes more stable.

Alpha particle (Ξ±): A particle consisting of 2 protons and 2 neutrons, emitted from heavy unstable nuclei.

Beta particle (Ξ²): A high-speed electron emitted from the nucleus when a neutron converts to a proton.

Gamma ray (Ξ³): High-energy electromagnetic radiation emitted from a nucleus releasing excess energy.

Ionisation: The process of removing electrons from atoms, creating ions. Radiation causes ionisation as it passes through matter.

⚠️ Common Misconceptions

Misconception 1: "Gamma decay changes the element"

Gamma emission does NOT change the atomic number or mass number β€” the element stays the same. Only alpha and beta decay change the element. Gamma is just an energy release from an excited nucleus dropping to a lower energy state.

Misconception 2: "More penetrating means more dangerous"

Inside the body, alpha radiation is the most dangerous because it is the most ionising. Although alpha doesn't penetrate skin from outside, if an alpha source is inhaled or swallowed, it causes massive localised damage to nearby cells. Outside the body, gamma is more dangerous because it can penetrate and reach internal organs.

Misconception 3: "Radioactive decay is triggered by external factors"

Radioactive decay is completely spontaneous and random. It cannot be triggered, slowed down, or sped up by temperature, pressure, or any chemical reaction. The only factor is the inherent instability of the nucleus.

🧠 Memory Aids

Penetrating power order: "Paper, Aluminium, Lead" β€” PAL. Alpha blocked by Paper, Beta by Aluminium, and Lead is needed for gamma (though it still gets through to some extent).

What changes in each decay:

  • Alpha: A goes down 4, Z goes down 2 (loses a "he-4" helium nucleus)
  • Beta: Z goes up 1, A stays same (neutron becomes proton: +1 proton)
  • Gamma: Nothing changes in nucleus (just energy release)

Ionising vs penetrating: Think of a charging rhinoceros vs a laser beam. The rhino (alpha) does massive damage but stops quickly. The laser beam (gamma) pierces through everything but doesn't do much damage at each point.

πŸŽ“ Higher Tier Only: Nuclear Equations in Detail

At higher tier, you must be able to complete and balance nuclear equations. The rules are:

  • The sum of mass numbers on the left = sum of mass numbers on the right
  • The sum of atomic numbers on the left = sum of atomic numbers on the right

Example β€” Alpha decay of radon-220:

Β²Β²β°β‚ˆβ‚†Rn β†’ ?_?X + ⁴₂α

Mass number: 220 = ? + 4 β†’ ? = 216

Atomic number: 86 = ? + 2 β†’ ? = 84 β†’ element is Polonium (Po)

Answer: Β²Β²β°β‚ˆβ‚†Rn β†’ Β²ΒΉβΆβ‚ˆβ‚„Po + ⁴₂α

Beta decay example: In ⁰₋₁β, the "βˆ’1" atomic number counts in the balance.

🎯 Exam Focus

Exam Favourite

This topic is on all four boards (AQA, Edexcel, OCR A and OCR B). The question types below are worth practising.

Examined in Edexcel 1PH0/1 (Paper 1). Edexcel favours context-based questions: "A hospital uses a radioactive isotope β€” write the nuclear equation for its decay." Nuclear equations (balancing mass and atomic numbers) are higher tier on Edexcel 1PH0. The contamination vs irradiation distinction is frequently tested using scenarios. "Suggest" questions on radiation safety scenarios are common.

Expect questions on:

  • Identifying and comparing properties of alpha, beta, and gamma (2–4 marks)
  • Completing nuclear equations for alpha and beta decay (2–3 marks each)
  • Explaining why gamma emission does not change the element (1–2 marks)
  • Explaining the relationship between ionising power and penetrating power (3 marks)
  • Choosing appropriate radiation for a given use or shielding scenario (2 marks)

πŸ’‘ Exam Tips for Radioactive Decay

🎯 Common Question Types:

  • Complete a nuclear decay equation (2–3 marks)
  • Compare properties of Ξ±, Ξ², Ξ³ (3–4 marks)
  • Explain why a particular radiation is used for a given purpose (2–3 marks)
  • Describe what happens in alpha or beta decay (3 marks)

πŸ“ Key Command Words:

  • State: Name the type, give numbers (no explanation needed)
  • Describe: Say what happens step by step
  • Explain: Give the scientific reason why
  • Compare: State at least one similarity and one difference

⚠️ Common Mistakes to Avoid:

  • Saying gamma changes the element β€” it does NOT
  • Confusing "most penetrating" with "most dangerous" β€” context matters
  • Forgetting beta particle has atomic number βˆ’1 in equations
  • Not checking both mass numbers AND atomic numbers balance in equations

Make this stick

Signing in gives access to all PrepWise features.

PrepWise is a trading name of A3M Quality Solutions Limited, registered in England and Wales, company number 14959172. Registered office: 202 Stroud Road, Gloucester, GL1 5LA. ICO registration ZC267069.