Seismic Waves

Test yourself on Seismic Waves with exam style questions, marked instantly.

Flashcards that come back just before you would forget them.

A revision plan that remembers what you know and shows what to do next.

See which topics you have nailed and which need another look.

Quiz yourself on Seismic WavesGet your flashcardsBuild my revision planTrack my progress

📖 X-Raying the Earth

We can't dig to the Earth's core — the deepest hole ever drilled is only 12 km (Earth's radius is 6,371 km!). So how do we know what's inside? Earthquakes! When earthquakes happen, they send waves through the entire planet. By studying how these waves travel, bend, and where they can't go, scientists have mapped the Earth's interior: a solid inner core, liquid outer core, mantle, and crust. It's like using ultrasound to see inside a body, but for the whole planet!

🌍 P-Waves and S-Waves

Earthquakes produce two main types of seismic waves that travel through the Earth:

P-waves (Primary waves)

P-waves are longitudinal waves — particles vibrate back and forth in the same direction as the wave travels, creating compressions and rarefactions. They can travel through solids AND liquids and are the fastest seismic waves, arriving at seismograph stations first (hence "Primary").

S-waves (Secondary waves)

S-waves are transverse waves — particles vibrate at right angles to the direction of wave travel. They can only travel through solids — they cannot pass through liquids because liquids cannot support shear (sideways) forces. S-waves arrive after P-waves (hence "Secondary") and do not reach the far side of Earth from an earthquake.

📊 P-Waves vs S-Waves

P-wave (longitudinal)

A straight coil spring with bunched coils, the compressions, and spread coils, the rarefactions, alternating along it. An arrow shows the wave direction to the right, and a double-headed arrow along the spring shows the coils moving back and forth in that same direction.

S-wave (transverse)

A coil spring bent into a sideways wave with two crests and two troughs. An arrow shows the wave direction to the right, and a vertical double-headed arrow shows the coils moving up and down at right angles to that direction.

Figure 1: P-waves are longitudinal and pass through solids and liquids; S-waves are transverse and cannot pass through liquids. A spring shows how each wave moves.

KEY EVIDENCE: S-waves don't reach the opposite side of Earth from an earthquake. This proves the outer core is liquid — S-waves cannot travel through liquids!

📊 Earth's Structure from Seismic Evidence

A cross-section of the Earth drawn as coloured circles, each labelled: the thin crust, the thick mantle, the outer core (liquid) and the inner core (solid). An earthquake at the top sends P-waves and S-waves through the Earth. S-waves stop at the outer core, which leaves an S-wave shadow zone on the far side. P-waves are bent by the core, which leaves a P-wave shadow zone on each side.

Figure 2: Earth's internal structure as revealed by seismic wave analysis

Not to scale: the crust is drawn thicker than it really is.

🌍 What Seismic Waves Tell Us About Earth's Structure

Key evidence:

  • S-wave shadow zone: S-waves don't arrive on the opposite side of Earth from an earthquake — there is a large shadow zone
  • This proves there's a liquid layer (outer core) that S-waves cannot pass through
  • P-wave shadow zone: P-waves are refracted (bent) at the edge of the core, so there is a band on the far side of Earth where very few P-waves arrive
  • Refraction occurs because the core has a different density from the mantle, causing waves to change speed and direction
  • Solid inner core: Some P-waves are detected arriving through the very centre, and their travel times suggest a solid inner core

Quick Check: Why do S-waves not reach the other side of Earth from an earthquake?

⚙️ How It Works: Why Seismic Waves Refract Inside Earth

Just like light refracts when passing from one medium to another, seismic waves refract when they pass through layers of different density inside Earth. As depth increases, pressure and temperature change, which changes the density and rigidity of rock — and therefore the wave speed.

Seismic waves generally speed up as they go deeper into the mantle (rock becomes denser and more rigid under pressure). Because speed increases continuously with depth, wave paths curve gradually — like light in a medium with a gradually changing refractive index. This curved path means seismic waves arrive at seismograph stations at unexpected positions, allowing scientists to deduce the density profile of Earth's interior.

When waves cross a sharp boundary (like the mantle-core boundary), there is a sudden change in speed and direction — like light hitting a glass surface — creating the distinct shadow zones observed.

📖 Key Definitions

P-waves: Primary (longitudinal) seismic waves that can travel through both solids and liquids. They are the fastest seismic waves.

S-waves: Secondary (transverse) seismic waves that can only travel through solids. They cannot pass through liquids.

Seismograph: An instrument that detects and records seismic waves, used to study earthquakes and Earth's interior.

S-wave shadow zone: The region on the far side of Earth from an earthquake where no S-waves are detected, proving the outer core is liquid.

P-wave shadow zone: A band on the far side of Earth where very few P-waves arrive, because they are refracted at the edge of the core.

⚖️ P-Waves vs S-Waves: Comparison Table

PropertyP-wavesS-waves
Wave typeLongitudinalTransverse
Particle motionParallel to wave directionPerpendicular to wave direction
Media they travel throughSolids AND liquidsSolids only
Relative speedFaster (arrive first)Slower (arrive second)
Reaches far side of Earth?Yes (refracted, but detected)No (blocked by liquid outer core)

⚠️ Common Misconceptions

Misconception 1: "S-waves are blocked by the whole core"

S-waves are blocked by the liquid outer core only. The inner core is solid, but S-waves never reach it because they are already blocked at the outer core boundary. If the whole core were solid, S-waves would pass through it. The fact that they don't reach the far side is specifically evidence that the outer core is liquid.

Misconception 2: "P-waves travel in straight lines through Earth"

P-waves continuously refract (curve) as they travel through Earth because density changes gradually with depth. Their paths are curved, not straight. They also refract sharply at boundaries (like the core-mantle boundary). It is this combination of curving and sharp refraction that creates the P-wave shadow zone.

Misconception 3: "We can only tell two things about Earth's interior from seismic waves"

Seismic wave data tells scientists: (1) that the outer core is liquid (from S-wave shadow zone), (2) that the inner core is solid (from P-wave travel times), (3) the approximate depth of each layer (from when waves arrive), (4) the density of each layer (from wave speeds), and (5) changes in composition at boundaries.

🧠 Memory Aid

P-waves vs S-waves:

  • P-waves = Primary (arrive first) = Push/pull (longitudinal) = Pass through everything (solids and liquids)
  • S-waves = Secondary (arrive second) = Shake sideways (transverse) = Stopped by liquid

Earth's layers (outside to inside): "Can My Little Pony Come In?"

Crust — Mantle — (Liquid) outer core — (solid) inner core

🎓 Higher Tier Only: Using Wave Speed to Determine Earth's Structure

At Higher tier, you need to explain how scientists use the arrival times and paths of seismic waves to determine Earth's structure quantitatively. Key points:

  • Multiple seismograph stations around Earth record the time each wave arrives
  • By comparing arrival times from different stations, scientists can calculate the path each wave took
  • Where waves speed up or slow down (from travel time calculations), this indicates a change in material density
  • The S-wave shadow zone starts sharply, and its size tells us how deep the edge of the outer core is (about 2,900 km down)
  • Some P-waves are detected after passing through the centre of Earth, and their travel times tell us the inner core is solid

Quick Check: Which type of seismic wave is evidence for a liquid outer core, and how does it provide this evidence?

🎯 Exam Focus

Frequently Examined

This topic is on all four boards (AQA, Edexcel, OCR A and OCR B). The question types below are worth practising.

This topic is examined in Edexcel 1PH0/1 (Paper 1). Edexcel seismic wave questions frequently use diagrams of Earth's interior and ask students to apply wave properties to explain shadow zones and Earth's structure — the "Suggest" command word is common here.

Seismic waves are a favourite exam topic because they require you to apply wave knowledge to a real-world context. Expect:

  • Explain the S-wave shadow zone — use properties of transverse waves to explain why they can't pass through liquid
  • Compare P and S waves — type, particle motion, media they travel through
  • Interpret a diagram of Earth's interior showing wave paths and shadow zones
  • Explain what seismic evidence tells us about Earth's layers (outer core = liquid, inner core = solid)

Classic 4-mark question: "Explain how seismic wave data provides evidence that the Earth's outer core is liquid." Full marks requires: S-waves are transverse → cannot pass through liquids → S-wave shadow zone observed → outer core must be liquid.

💡 Exam Tips

🎯 Common Question Types:

  • Explain the S-wave shadow zone as evidence for a liquid core (4–5 marks)
  • Compare properties of P-waves and S-waves (3–4 marks)
  • Describe what happens to P-waves as they travel through Earth (3 marks)
  • Interpret a diagram of Earth's layers (2 marks)

📝 Key Command Words:

  • Explain: Give the chain of reasoning — transverse → can't pass liquid → shadow zone → outer core liquid
  • Compare: Address both P and S waves for each property (type, speed, media)
  • Describe: Say what happens to the waves, not just what they are
  • Use evidence from the diagram: Reference specific features like shadow zones

⚠️ Common Mistakes to Avoid:

  • Saying "S-waves cannot travel through the core" without explaining WHY (transverse → liquids)
  • Confusing P-waves (longitudinal) with S-waves (transverse)
  • Forgetting that P-waves still refract and create a partial shadow zone (they are not blocked, just bent)
  • Saying the inner core is liquid — it is solid (evidenced by P-waves passing through it)

Make this stick

Signing in gives access to all PrepWise features.

PrepWise is a trading name of A3M Quality Solutions Limited, registered in England and Wales, company number 14959172. Registered office: 202 Stroud Road, Gloucester, GL1 5LA. ICO registration ZC267069.