Reflection & Refraction

Test yourself on Reflection & Refraction with exam style questions, marked instantly.

Flashcards that come back just before you would forget them.

A revision plan that remembers what you know and shows what to do next.

See which topics you have nailed and which need another look.

Quiz yourself on Reflection & RefractionGet your flashcardsBuild my revision planTrack my progress

📖 Why a Straw Looks Bent in Water

Drop a straw into a glass of water and it appears to bend at the surface. Nothing has physically bent — what changed is the speed of light. Light travels more slowly in water than in air, so when it crosses the boundary at an angle, it changes direction. This is refraction, and it explains rainbows, lenses, fibre-optic internet cables, and why swimming pools look shallower than they are. Understanding how waves change direction at boundaries is fundamental to almost all optical technology!

📊 Reflection — The Law of Reflection

A ray of light hits a flat mirror and bounces off. A dashed line, the normal, stands at right angles to the mirror where the ray hits. The incident ray comes in from the upper left and the reflected ray leaves to the upper right. The angle between the incident ray and the normal is marked i and the angle between the reflected ray and the normal is marked r. The two angles are equal.

Figure 1: The law of reflection. i is the angle of incidence and r is the angle of reflection; both are measured from the normal.

LAW OF REFLECTION: Angle of incidence = Angle of reflection (i = r)

IMPORTANT: All angles are measured from the normal (a line perpendicular to the surface at the point of incidence) — NOT from the surface itself.

TYPES OF REFLECTION:

  • Specular (smooth surface) — All rays reflect in the same direction → clear image (e.g., mirror)
  • Diffuse (rough surface) — Rays scatter in many directions → no clear image (e.g., paper, walls)

📊 Refraction — Bending at Boundaries

A ray of light entering a glass block from air bends towards the normal, then leaves the block bending away from the normal and travelling parallel to its first path. The angles i and r are marked between each ray and its normal.

Figure 2: Light entering and leaving a glass block. The ray bends towards the normal on the way in and away from it on the way out, and leaves parallel to its first path. At each surface, i is the angle of incidence and r is the angle of refraction.

RULES: Fast → Slow = bends toward normal (e.g., air to glass). Slow → Fast = bends away from normal (e.g., glass to air). At 90° (perpendicular) = no bending, but speed still changes.

💡 Why Refraction Happens

Refraction occurs because different media have different optical densities, which affects how fast light (or any wave) can travel through them. When a wave front hits a boundary at an angle, one side of the wave hits the new medium first and slows down, while the other side is still in the old medium at its original speed. This causes the wave front to rotate — bending the direction of travel.

A helpful analogy: imagine a marching band moving across a field and hitting a patch of mud at an angle. The first soldiers to enter the mud slow down; the others are still on grass and moving fast. The whole row of soldiers pivots — this is exactly what happens to light at a glass surface.

💎 Total Internal Reflection

What it is: When light reflects COMPLETELY inside a denser medium instead of refracting out.

Two conditions required:

  • Light travelling from a denser → less dense medium (e.g., glass to air)
  • Angle of incidence > critical angle

Applications:

  • Optical fibres — light bounces along the inside by TIR, carries data at the speed of light
  • Endoscopes — doctors see inside the body without surgery
  • Diamonds — sparkle due to a low critical angle (about 24°, compared with about 42° for glass) and many TIR reflections inside
  • Binoculars/periscopes — use glass prisms where TIR redirects the light path

Quick Check: A ray of light hits a mirror at 40° to the surface. What is the angle of reflection?

⚙️ How It Works: Total Internal Reflection in Optical Fibres

An optical fibre is a thin glass or plastic strand. Light enters at one end and hits the glass-air boundary inside the fibre at an angle greater than the critical angle. Because the angle exceeds the critical angle, ALL the light is reflected (none escapes through the sides). The light bounces from one side to the other, zigzagging along the entire length of the fibre without losing significant energy.

This is why fibre-optic internet is so fast: light signals travel at roughly 2 × 10⁸ m/s through the glass, carrying enormous amounts of data. Unlike electrical signals in copper wire, light in glass has virtually no resistance and doesn't generate heat, making it far more efficient for long-distance data transmission.

📖 Key Definitions

Normal: An imaginary line drawn perpendicular (at 90°) to a surface at the point where a ray meets it. All angles in optics are measured from the normal.

Angle of incidence: The angle between the incident (incoming) ray and the normal at the point of incidence.

Angle of reflection: The angle between the reflected ray and the normal. Always equals the angle of incidence.

Refraction: The change in direction of a wave as it passes from one medium to another, caused by a change in wave speed.

Critical angle: The angle of incidence (in the denser medium) at which the refracted ray travels along the boundary (angle of refraction = 90°). Beyond this, total internal reflection occurs.

Total internal reflection (TIR): Complete reflection of a wave at a boundary when the angle of incidence exceeds the critical angle, with no refraction into the less dense medium.

⚠️ Common Misconceptions

Misconception 1: "Angles are measured from the surface"

This is the most common mistake in optics questions. ALL angles in reflection and refraction are measured from the normal — the line perpendicular to the surface. If a ray hits a mirror at 30° to the mirror, the angle of incidence is 60° (not 30°). Always draw the normal first in diagrams.

Misconception 2: "Light always bends when crossing a boundary"

If light hits a boundary at exactly 90° (perpendicular, along the normal), it does NOT bend — it continues straight through. It does slow down and its wavelength changes, but there is no change in direction. Bending only happens when the angle of incidence is greater than 0°.

Misconception 3: "Total internal reflection means no light escapes at all"

TIR means no light is refracted (transmitted into the less dense medium). It still reflects entirely. For TIR to occur, BOTH conditions must be met: the light must be in the denser medium AND the angle must exceed the critical angle. If either condition is not met, some light is refracted out.

🧠 Memory Aid

Refraction direction: "Slow to Fast — bend away from normal. Fast to Slow — bend toward normal."

Or remember it with a speed analogy: entering a denser medium is like a car going from tarmac into mud. The car slows and turns toward the mud (toward the normal). Coming back out of mud onto tarmac, it speeds up and swings away.

Critical angle conditions — the "DANG" rule:

  • Denser medium (light must be in the denser material)
  • Angle is greater than critical angle
  • No refraction occurs
  • Goes back by total reflection

Quick Check: State TWO conditions that must be met for total internal reflection to occur.

🎯 Exam Focus

Frequently Examined

This topic is on all four boards (AQA, Edexcel, OCR A and OCR B). The question types below are worth practising.

Edexcel (1PH0/1, Paper 1): Edexcel questions on reflection and refraction commonly involve completing ray diagrams, explaining total internal reflection in optical fibres — expect both diagram-based and extended-writing questions.

Board note: AQA (8463/8464) examines reflection with ray diagrams (Physics only, all tiers) and refraction qualitatively using wavefront diagrams (Higher tier only). AQA does not examine total internal reflection or the critical angle.

Reflection and refraction are tested with diagrams and explanations. Expect to:

  • Draw or complete ray diagrams showing reflection at a mirror or refraction at a glass block boundary
  • State the law of reflection and confirm angles from a diagram
  • Explain total internal reflection — state both conditions and name an application
  • Compare specular and diffuse reflection — smooth vs rough surface, direction of reflected rays

Classic exam question: "Explain how an optical fibre uses total internal reflection to transmit data." — This needs: entering from denser medium, angle exceeds critical angle, complete reflection, no energy loss through the sides.

💡 Exam Tips

🎯 Common Question Types:

  • Complete a ray diagram with correct angles (2–3 marks)
  • Explain why refraction occurs at a boundary (3 marks)
  • Describe/explain total internal reflection with a named application (4 marks)
  • State and explain the difference between specular and diffuse reflection (2 marks)

📝 Key Command Words:

  • State: Give the law of reflection as an equation (i = r)
  • Describe: What happens to the light — direction, speed, wavelength
  • Explain: Give the reason — speed change causes direction change
  • Draw: Show normal, measure angles correctly, use arrows on rays

⚠️ Common Mistakes to Avoid:

  • Measuring angles from the surface instead of the normal
  • Forgetting to draw the normal in ray diagram questions
  • Saying "light bends because it enters a denser medium" — it only bends if hitting at an angle
  • For TIR: forgetting to state BOTH conditions (denser medium AND angle > critical)

Quick Check: Why does a diamond sparkle more than a piece of glass of the same shape?

Make this stick

Signing in gives access to all PrepWise features.

PrepWise is a trading name of A3M Quality Solutions Limited, registered in England and Wales, company number 14959172. Registered office: 202 Stroud Road, Gloucester, GL1 5LA. ICO registration ZC267069.