Gravitational Potential Energy

Test yourself on Gravitational Potential Energy with exam style questions, marked instantly.

Flashcards that come back just before you would forget them.

A revision plan that remembers what you know and shows what to do next.

See which topics you have nailed and which need another look.

Quiz yourself on Gravitational Potential EnergyGet your flashcardsBuild my revision planTrack my progress

📖 The Power of Height

The Hoover Dam holds back 35 billion cubic metres of water — enough to flood a small country several metres deep. That water isn't moving, but it stores an absolutely COLOSSAL amount of energy just by being high up. When water falls 180 metres through turbines, gravitational potential energy converts to kinetic, then to electrical. The dam generates 4 billion kilowatt-hours per year — enough for 1.3 million homes! All that power from water that was lifted by the Sun evaporating oceans millions of years ago. Height = stored energy, waiting to be released.
GPE Equation (ON FORMULA SHEET ✓)
Ep = mgh
GPE (J) = mass (kg) × gravitational field strength (N/kg) × height (m)

📚 Understanding Gravitational Field Strength (g)

What g means: The gravitational field strength tells you how strong gravity pulls on each kilogram of mass. On Earth, g = 10 N/kg means every kilogram experiences a gravitational force of 10 Newtons.

g values on different bodies:

Locationg value (N/kg)Effect
Earth (surface)10 (use this!)Standard — what we're used to
Moon1.66× less GPE for same height; astronauts could jump 6× higher
Mars3.7About 1/3 of Earth's gravity
Jupiter252.5× Earth's gravity — you'd feel very heavy!

💡 Exam tip: Always use g = 10 N/kg unless the question tells you otherwise. Some exams use g = 9.8 N/kg for more precision, but 10 is standard for GCSE.

📚 Key Facts — Gravitational Potential Energy

What it is: Energy stored in an object due to its position in a gravitational field — essentially, how high it is above a reference point.

Key relationships:

  • GPE ∝ mass — double the mass, double the GPE (directly proportional)
  • GPE ∝ height — double the height, double the GPE (directly proportional)
  • GPE ∝ g — same object at same height on Moon has 1/6 the GPE as on Earth

The reference point:

  • GPE is always measured relative to something — usually the ground
  • What matters is the HEIGHT CHANGE, not absolute position
  • An object can have negative GPE if it's below the reference point (e.g., down a well)

🔬 Deep Dive: Work Done and GPE

🏋️ The Weightlifting Analogy

When you lift a weight, you do work against gravity. That work doesn't disappear — it's stored as GPE in the raised weight. The higher you lift it, the more work you do, the more GPE it gains.

Think of it like depositing money in a high-interest savings account in the sky. The work you put in (lifting) becomes stored value (GPE) that can be withdrawn later (object falls).

The connection: Work done = Force × Distance

  • Force needed to lift = Weight = mg (mass × g)
  • Distance = height (h)
  • Work done = mg × h = mgh = GPE gained!

💡 This is why the equations are identical: Work done against gravity = GPE gained

📊 GPE Increases with Height

Three metal balls at heights of 3 m, 6 m and 12 m above a stone floor, beside a height scale from 0 to 12 m. White arrows show each height. The GPE of each ball is written above it: 30 J at 3 m, 60 J at 6 m and 120 J at 12 m.

Figure 1: GPE is directly proportional to height. Doubling the height doubles the GPE. Each ball has mass 1 kg and g = 10 N/kg.

KEY RELATIONSHIP: GPE is directly proportional to height. Double the height = double the GPE. The same 1 kg mass has 4× more GPE at 12 m than at 3 m.

📊 GPE and KE Trade-Off (Conservation of Energy)

KEY PRINCIPLE: In a closed system with no friction, GPE + KE = constant. As height decreases, GPE converts to KE (object speeds up). As height increases, KE converts to GPE (object slows down).

⚙️ How It Works: GPE and KE Exchange

When an object falls freely (no friction or air resistance), all its gravitational potential energy converts to kinetic energy. This is the basis for most GPE-to-speed calculations.

The key equation is: GPE lost = KE gained, which means mgh = ½mv². Notice that mass (m) appears on both sides — it cancels out! This means the final speed of a falling object does not depend on its mass (ignoring air resistance). A feather and a cannonball would hit the ground at the same speed in a vacuum.

In reality, air resistance means lighter objects are slowed more relative to their weight. But in GCSE calculations, unless told otherwise, assume all GPE converts to KE.

🔧 How to Rearrange the GPE Equation

Starting equation: Ep = mgh

To find mass: m = Ep / (g × h)

To find height: h = Ep / (m × g)

To find g: g = Ep / (m × h)

💡 Exam tip: Height must be VERTICAL. If an object moves along a slope, only use the vertical height change in your GPE calculation, NOT the distance along the slope.

🔬 Worked Example: Finding Speed from Falling

Question: A 2 kg ball is dropped from 5 m. Calculate its speed just before hitting the ground. (g = 10 N/kg, no air resistance)

Step 1: Calculate GPE at the top

GPE = mgh = 2 × 10 × 5 = 100 J

Step 2: Apply conservation of energy

At the bottom, all GPE has converted to KE (no air resistance)

So KE at bottom = 100 J

Step 3: Use KE equation to find speed

KE = ½mv² → 100 = ½ × 2 × v² → 100 = v²

v = √100 = 10 m/s

Quick Check: Calculate the GPE gained by a 5 kg object lifted 3 m. (g = 10 N/kg)

📖 Key Definitions

Gravitational potential energy (GPE): Energy stored in an object due to its position in a gravitational field. E_p = mgh. Units: Joules (J).

Gravitational field strength (g): The force of gravity on each kilogram of mass. On Earth, g = 10 N/kg. Units: N/kg.

Height (h): The vertical distance above a reference point. Must be measured vertically, not along a slope. Units: metres (m).

Conservation of energy: In a closed system with no friction, GPE lost = KE gained (and vice versa). The total mechanical energy is constant.

⚠️ Common Misconceptions

Misconception 1: "Height means the distance along a slope"

GPE depends on vertical height only. If a ball rolls 10 m up a ramp inclined at 30°, only the vertical component of that distance (5 m) counts for GPE. Using the slope length (10 m) instead of the vertical height (5 m) would give an answer twice too large.

Misconception 2: "Heavier objects fall faster and have more speed"

When mass cancels in mgh = ½mv², the speed a falling object reaches does not depend on its mass (ignoring air resistance). A heavy object and a light object dropped from the same height will hit the ground at the same speed — a result famously demonstrated by Galileo. However, a heavier object does have more kinetic energy at that speed because KE = ½mv².

Misconception 3: "GPE only exists when something is in the air"

Any object above a reference point has GPE — including a book on a shelf, a car on a hill, or a person standing on stairs. GPE is defined relative to a chosen reference level. What matters for calculations is the change in height, not whether the object is "in the air".

🧠 Memory Aid: The GPE Equation

Remember E_p = mgh as: "Masses on Great Hills" — mass, gravitational field strength, height.

Or think of it as: the bigger the object (m), the stronger gravity (g), and the higher it is (h), the more "potential danger" it has — all three multiply together.

Hoover Dam memory hook: "The higher the water, the more power the dam can generate." Height = stored energy potential.

🎓 Higher Tier Only: Energy at Any Point During a Fall

At any point during a fall (assuming no air resistance), the total mechanical energy is conserved:

  • Total energy = GPE + KE = constant at every point
  • At height h above ground (starting from height H): GPE = mgh, KE = mg(H − h)
  • Speed at any height: v = √(2g(H − h))

This means you can calculate the speed of an object at any point during a fall — not just at the start and end. For example, a ball dropped from 20 m will have speed √(2 × 10 × 5) = 10 m/s when it has fallen 5 m (i.e., at height 15 m).

🎯 Exam Focus

Exam Favourite

This topic is on all four boards (AQA, Edexcel, OCR A and OCR B). The question types below are worth practising.

This topic is examined in Edexcel 1PH0/1 and 1PH0/2 (Papers 1 and 2). Edexcel questions typically use contextual scenarios such as a ball thrown upward, a skier on a slope, or a fairground ride — expect to link GPE and KE in multi-step calculations. You must be able to:

  • Calculate GPE using E_p = mgh
  • Use GPE = KE to find speed after falling or height reached after being launched
  • Explain why a roller coaster speeds up as it descends (GPE → KE)
  • Compare GPE on Earth vs on the Moon/Mars for the same object and height

Multi-step questions are common: given the height and mass, find the speed at the bottom. Remember: calculate GPE first, set equal to KE, then solve for v with a square root.

💡 Exam Tips for Gravitational Potential Energy

🎯 Common Question Types:

  • Calculate GPE given mass and height (1-2 marks)
  • Find the speed at the bottom of a fall using GPE = KE (3-4 marks)
  • Explain why a roller coaster has maximum speed at the bottom (2-3 marks)
  • Compare GPE on different planets (2-3 marks — change the g value)

📝 Key Command Words:

  • Calculate: Show E_p = mgh with values substituted and include units
  • Explain: Reference GPE converting to KE as height decreases
  • Compare: Show how changing g or h or m affects the GPE value

⚠️ Common Mistakes to Avoid:

  • Using distance along slope instead of vertical height — only vertical h counts!
  • Using wrong g value — use 10 N/kg unless told otherwise
  • Forgetting unit conversions — mass in kg, height in m
  • Not recognising conservation problems — if GPE converts to KE, set them equal

Quick Check: A 3 kg ball is dropped from a height of 20 m. What is its speed just before it hits the ground? (g = 10 N/kg, ignore air resistance)

Make this stick

Signing in gives access to all PrepWise features.

PrepWise is a trading name of A3M Quality Solutions Limited, registered in England and Wales, company number 14959172. Registered office: 202 Stroud Road, Gloucester, GL1 5LA. ICO registration ZC267069.