Electromagnetic Induction

Test yourself on Electromagnetic Induction with exam style questions, marked instantly.

Flashcards that come back just before you would forget them.

A revision plan that remembers what you know and shows what to do next.

See which topics you have nailed and which need another look.

Quiz yourself on Electromagnetic InductionGet your flashcardsBuild my revision planTrack my progress

šŸ“– The Motor Effect in Reverse

An AC generator: a rectangular coil on a vertical axle turned in the magnetic field between a red N magnet and a blue S magnet. Two slip rings with brushes connect it to a lamp.
If a current in a magnetic field produces motion, can motion in a magnetic field produce current? YES! This is electromagnetic induction — discovered by Faraday in 1831. Move a magnet into a coil, and current flows. Stop moving, and the current stops. This simple principle generates virtually ALL the world's electricity — from nuclear power stations to wind turbines to the dynamo on your bike!

KEY REQUIREMENT: The magnetic field must be CHANGING. A stationary magnet in a coil induces no voltage!

šŸ“š How to Induce a Voltage

Methods:

  • Move a conductor through a magnetic field
  • Move a magnet into/out of a coil
  • Change the magnetic field through a coil

Key requirement: The magnetic field through the conductor must be CHANGING. No change = no induced voltage.

To increase induced voltage:

  • Move the magnet/conductor faster
  • Use a stronger magnet
  • Use more turns on the coil

To reverse the direction of induced current:

  • Move in the opposite direction
  • Reverse the magnetic field (flip the magnet)

šŸ”Œ Generators & Alternators

AC Generator (Alternator):

  • Coil rotates in magnetic field
  • Uses slip rings — output is AC
  • Voltage alternates as coil rotates (sine wave)
  • Used in power stations

DC Generator (Dynamo):

  • Same as AC generator but uses split-ring commutator
  • Commutator reverses connection every half turn
  • Output is DC (always same direction, though bumpy)
  • Used in bicycle dynamos

āš–ļø Generator vs Motor

Feature Generator Motor
Energy conversion Kinetic → electrical Electrical → kinetic
Input Mechanical rotation of coil Current through coil
Output AC or DC current Rotation of coil
Connection Slip rings (AC) or split-ring commutator (DC) Split-ring commutator
Principle used Electromagnetic induction Motor effect (F = BIL)
Examples Power stations, dynamos, bike lights Electric cars, fans, washing machines

šŸŽ“ Higher Tier: Why Induction Opposes the Change

The induced current always flows in a direction that opposes the change that caused it, either the movement of the conductor or the change in the magnetic field. This is a consequence of the conservation of energy.

Think of it this way: if the induced current helped the magnet move faster into the coil, you would be getting electrical energy for free. The magnet would speed up and make more current, which would speed it up further. This would break the law of conservation of energy. Instead, the induced current makes a magnetic field that pushes back against the incoming magnet. You have to do work to push the magnet in, and that work is transferred as electrical energy.

Practical implication: This is why generators need an energy input (wind, steam, water). The electricity they produce comes directly from the work done to keep the coil turning against the opposing force. There is no free electricity.

Quick Check: A student pushes a bar magnet into a coil, then holds the magnet still inside the coil. Explain what happens to the induced current while the magnet is still, and explain the direction of the induced current while the magnet was moving in.

šŸŽ“ Higher Tier: Transformers and the National Grid

Electromagnetic induction is also the principle behind transformers. An alternating current in the primary coil creates a changing magnetic field in the iron core, which induces an alternating voltage in the secondary coil.

Transformer equation: Vā‚›/Vā‚š = Nā‚›/Nā‚š (voltage ratio = turns ratio)

Why the National Grid uses high voltage: Electrical power = current Ɨ voltage. To transmit the same power at a higher voltage, less current is needed. Less current means less energy wasted heating the transmission cables (power wasted = I²R). Step-up transformers near power stations increase the voltage to around 400,000 V for transmission; step-down transformers near homes and businesses reduce it to 230 V for safe use.

Why transformers only work with AC: Transformers need a constantly changing magnetic field to induce a voltage in the secondary coil. Direct current produces a constant (non-changing) field, so it cannot induce a continuous voltage in the secondary coil. Alternating current continually reverses direction, so the magnetic field keeps changing, inducing a continuous alternating voltage in the secondary coil.

šŸŽÆ Exam Focus

Frequently Examined

This topic is on all four boards (AQA, Edexcel, OCR A and OCR B). The question types below are worth practising.

Electromagnetic induction is examined across several question types. Examined in Edexcel 1PH0/2 (Paper 2). Edexcel uses context-based questions — wind turbines, generators in power stations, microphones, bicycle dynamos — so practise applying induction principles to unfamiliar scenarios.

  • Conditions for induction (2 marks): Must state that the magnetic field must be CHANGING. A stationary magnet produces no voltage. Award both marks: state the condition AND what happens when it is not met.
  • Increasing induced voltage (2-3 marks): Three factors — move faster, stronger magnet, more turns on coil. Each factor plus a reason earns a mark.
  • Reversing current direction (2 marks): Either reverse the motion OR flip the magnet. Both are valid for full marks.
  • AC generator vs DC dynamo (3 marks): Slip rings give AC output; split-ring commutator gives DC output. Explain why the output differs for each.
  • Direction of the induced current (Higher tier, 2-3 marks): State that the induced current opposes the change that caused it, and name what is being opposed (the motion or the change in the magnetic field). Link to conservation of energy for the higher marks.
  • Transformers and the National Grid (HT, 4-6 marks): Explain why high voltage transmission reduces power lost as heat (P = I²R), and why transformers only work with AC.
  • "Suggest" questions (Edexcel): Given a novel generator or sensor design, suggest how its output voltage could be increased or its current direction reversed — apply the three induction factors.

šŸ’” Exam Tips for Electromagnetic Induction

šŸŽÆ Common Question Types:

  • State the condition needed for electromagnetic induction (1-2 marks)
  • Describe three ways to increase the induced voltage (3 marks)
  • Explain the difference between an AC generator and a DC dynamo (3 marks)
  • Explain why a moving magnet induces a current but a stationary magnet does not (2 marks)
  • Higher tier: explain the direction of an induced current using the idea that it opposes the change (2-3 marks)
  • Explain why the National Grid transmits electricity at high voltage (HT, 2-4 marks)

šŸ“ Key Command Words:

  • State: Give the condition (changing magnetic field) — one clear sentence
  • Explain: Link the change in magnetic field to the force on electrons — give a mechanism
  • Describe: Say what happens step by step (magnet moves in → field increases → voltage induced)
  • Suggest: Apply the three factors to a new device you haven't seen before

āš ļø Common Mistakes to Avoid:

  • Saying "the magnet must be moving" — it's the CHANGING magnetic field that matters (rotating coil also works)
  • Confusing slip rings (AC, induction) with split-ring commutator (DC, motor)
  • Forgetting that reversing motion OR reversing field BOTH reverse current direction
  • Mixing up the motor effect (current in field → force) with induction (motion in field → voltage)

Make this stick

Signing in gives access to all PrepWise features.

PrepWise is a trading name of A3M Quality Solutions Limited, registered in England and Wales, company number 14959172. Registered office: 202 Stroud Road, Gloucester, GL1 5LA. ICO registration ZC267069.