Density

Test yourself on Density with exam style questions, marked instantly.

Flashcards that come back just before you would forget them.

A revision plan that remembers what you know and shows what to do next.

See which topics you have nailed and which need another look.

Quiz yourself on DensityGet your flashcardsBuild my revision planTrack my progress

📖 The Suitcase Test

Imagine two identical suitcases — one packed with feathers, the other with bricks. Same size, VASTLY different weights. That difference is density in action. Density tells you how much mass is "packed into" a given space. A small gold ring and a massive gold bar have the SAME density because they're made of the same stuff — density is a property of the MATERIAL, not the object. This is why ships made of steel (density 7800 kg/m³) can float — they're mostly filled with air, making their OVERALL density less than water!
Density Equation
ρ = m / V
Density (kg/m³) = Mass (kg) ÷ Volume (m³)

🔬 Understanding Density at the Particle Level

Density is all about how much matter (mass) is squeezed into a given space (volume). But why do different materials have different densities? There are two factors at the particle level:

  • Atomic mass: Heavier atoms (like gold or lead) make denser materials than lighter atoms (like carbon or aluminium), even if arranged the same way.
  • Packing arrangement: Atoms in solids and liquids are tightly packed; atoms in gases are spread far apart. This is why gases have much lower densities than solids or liquids.

Think of a box of oranges vs a box of marbles the same size — the marbles pack more tightly and have more mass per unit volume, so they are denser.

📚 Key Density Values

MaterialDensity (kg/m³)Density (g/cm³)
Air1.20.0012
Ice9200.92
Water10001.0
Aluminium27002.7
Steel/Iron78007.8
Copper89008.9
Gold19,30019.3

The water benchmark:

  • Objects with density < 1000 kg/m³ (or < 1 g/cm³) FLOAT in water
  • Objects with density > 1000 kg/m³ (or > 1 g/cm³) SINK in water
  • Ice floats because it's LESS dense than liquid water (unusual property!)

Two common units:

  • kg/m³ — SI unit, used in most calculations
  • g/cm³ — often used for small objects; easier numbers
  • Conversion: 1 g/cm³ = 1000 kg/m³

🔬 Required Practical: Measuring Density

For REGULAR shapes (cube, cuboid, cylinder):

  1. Measure mass using a balance (kg or g)
  2. Measure dimensions with ruler/vernier calipers
  3. Calculate volume using geometry:
    • Cuboid: V = length × width × height
    • Cylinder: V = πr²h
  4. Calculate density: ρ = m / V

For IRREGULAR shapes (stones, random objects):

  1. Measure mass using a balance
  2. Use displacement method:
    • Fill measuring cylinder partially with water
    • Record initial volume (V₁)
    • Lower object into water (fully submerged)
    • Record new volume (V₂)
  3. Volume of object = V₂ - V₁
  4. Calculate density: ρ = m / V

Sources of error:

  • Parallax error when reading water level
  • Air bubbles on irregular objects
  • Objects that absorb water

📊 Displacement Method Visualised

Eureka can (overflow can) filled with glowing blue water. A rock on a string is lowered into the water, causing water to overflow through the spout into a measuring cylinder below. The displaced water volume equals the rock's volume.

Figure 1: Eureka can method — the volume of water displaced into the measuring cylinder equals the volume of the irregular solid.

⚙️ How Density Links to Particle Model

At the particle level, the three states of matter have very different densities because of packing:

  • Solids: Particles are closely packed in a regular lattice — very little empty space, so density is high.
  • Liquids: Particles are still close together but disordered — density similar to solids but slightly lower (water is an exception — it expands on freezing).
  • Gases: Particles are widely spaced (typically 10× further apart than in solids) — density is about 1000× lower than the equivalent liquid or solid.

This explains why the density of steam (0.0006 g/cm³) is so much lower than liquid water (1.0 g/cm³) — the same molecules, just with enormous gaps between them.

📖 Key Definitions

Density (ρ): The mass per unit volume of a substance. ρ = m/V. Units: kg/m³ or g/cm³.

Mass (m): The amount of matter in an object. Measured in kilograms (kg). Does not change with location.

Volume (V): The amount of space an object occupies. Measured in m³ or cm³.

Displacement method: A technique for measuring the volume of an irregular solid by submerging it in water and measuring the volume of water displaced.

Upthrust: The upward force exerted by a fluid on a submerged object, equal to the weight of fluid displaced. If upthrust equals weight, the object floats.

Quick Check: A rock has a mass of 270 g and a volume of 100 cm³. What is its density in g/cm³?

⚠️ Common Misconceptions

Misconception 1: "Heavier objects have higher density"

This is wrong! Density depends on mass AND volume. A large block of polystyrene is heavier than a small steel ball, but polystyrene is far less dense. You can only compare densities when looking at equal volumes of each material.

Misconception 2: "Density changes when you cut a material in half"

No — density is an intrinsic property of a material. Cut a steel bar in half and each half has half the mass AND half the volume. The ratio (density) stays exactly the same: 7800 kg/m³.

Misconception 3: "Gases have no density"

Gases do have density — air is about 1.2 kg/m³. It is much less than liquids or solids, but it is not zero. This is why helium balloons float (helium is less dense than air) and why carbon dioxide sinks (denser than air).

Quick Check: Oil has a density of 900 kg/m³ and water has a density of 1000 kg/m³. What happens when you mix them, and why?

🧠 Memory Aid

The equation triangle for density:

Write m at the top of a triangle, ρ (rho) bottom-left, V bottom-right. Cover the quantity you want:

  • Cover ρ: density = m ÷ V
  • Cover m: mass = ρ × V
  • Cover V: volume = m ÷ ρ

Remember the symbol: ρ is the Greek letter "rho" — think "rho = ρack it in" (how tightly packed the material is).

Float or sink rule: "If density is greater than water (1000 kg/m³), it will sink. If less, it will float." — The word LESS has 4 letters, and so does FLOAT. More has 4 letters too, but think: MORE density = MORE sinking.

🎓 Higher Tier: Pressure in Fluids and Upthrust

Pressure in a fluid increases with depth according to: P = ρ × g × h

  • P = pressure (Pa)
  • ρ = density of the fluid (kg/m³)
  • g = gravitational field strength (10 N/kg)
  • h = depth below surface (m)

Upthrust arises because pressure is greater at the bottom of a submerged object than at the top. This pressure difference creates a net upward force.

Archimedes' Principle: The upthrust on an object equals the weight of fluid it displaces. If upthrust ≥ weight of object, the object floats.

This explains why a steel ship floats — its hollow shape displaces a large volume of water, so upthrust equals its weight even though steel itself is much denser than water.

🎯 Exam Focus

Exam Favourite

This topic is on all four boards (AQA, Edexcel, OCR A and OCR B). The question types below are worth practising.

Examined in Edexcel 1PH0/2 (Paper 2). CP6 (Investigating the density of solids and liquids) is a Core Practical on Edexcel — expect questions that directly test your knowledge of the displacement method and sources of error. Edexcel also uses context-based questions involving material properties (e.g. why aluminium is used in aircraft, why wood floats).

  • Calculation questions (2-3 marks): Given mass and volume, calculate density. Or given density and one other quantity, find the third. Always show units clearly — kg/m³ or g/cm³.
  • CP6 Required practical questions (3-4 marks): Describe how to measure density of a regular or irregular object. Include: measure mass with balance, find volume (geometry or displacement), calculate ρ = m/V.
  • Explain floating/sinking (2 marks): Compare the density of the object to the density of water/fluid. State whether it is greater or less, and the consequence.
  • Unit conversion: Examiners sometimes mix kg/m³ and g/cm³. Know that 1 g/cm³ = 1000 kg/m³.
  • "Suggest" questions (Edexcel): Given an unusual material or object, suggest why it floats or sinks — apply ρ = m/V reasoning to the context.

💡 Exam Tips for Density

🎯 Common Question Types:

  • Calculate density given mass and volume (2 marks)
  • Describe the displacement method for irregular objects (3 marks)
  • Explain why an object floats or sinks (2 marks)
  • Identify sources of error in the density practical (2 marks)

📝 Key Command Words:

  • Calculate: Use ρ = m/V, show working, give units
  • Describe: Give step-by-step method for practical
  • Explain: Compare densities and state the consequence (float/sink)
  • Suggest: Often asks why results might be inaccurate

⚠️ Common Mistakes to Avoid:

  • Forgetting to state units — always include kg/m³ or g/cm³
  • Confusing mass and weight in density questions
  • Using V₂ instead of V₂ − V₁ for displacement volume
  • Mixing up g/cm³ and kg/m³ without converting (multiply by 1000)

Quick Check: Describe the displacement method for finding the volume of a small stone. What equipment do you need and what do you measure?

Make this stick

Signing in gives access to all PrepWise features.

PrepWise is a trading name of A3M Quality Solutions Limited, registered in England and Wales, company number 14959172. Registered office: 202 Stroud Road, Gloucester, GL1 5LA. ICO registration ZC267069.