Lenses & Images

Test yourself on Lenses & Images with exam style questions, marked instantly.

Flashcards that come back just before you would forget them.

A revision plan that remembers what you know and shows what to do next.

See which topics you have nailed and which need another look.

Quiz yourself on Lenses & ImagesGet your flashcardsBuild my revision planTrack my progress

๐Ÿ“– From Glasses to Cameras

Every camera, projector, telescope, and pair of glasses uses lenses. A convex lens in a magnifying glass can focus sunlight to start a fire โ€” concentrating parallel rays to a single point. Your eye has a convex lens that focuses images onto your retina. Understanding how lenses bend light explains everything from why you need glasses to how microscopes reveal invisible worlds!

๐Ÿ” How Lenses Work

A lens works by refracting (bending) light rays. The shape of the lens determines how much and in which direction rays bend:

Convex (converging) lens

Thicker in the middle, thinner at the edges. Parallel rays of light are refracted toward the principal axis and converge at the focal point (F) on the other side. This is because the edges of the lens have a steeper angle, causing more refraction than the centre. Used in magnifying glasses, cameras, and the eye.

Concave (diverging) lens

Thinner in the middle, thicker at the edges. Parallel rays are refracted away from the principal axis and appear to diverge from a focal point on the same side as the incoming light. Used in spectacles for short-sightedness.

Convex vs Concave Lenses

Convex lens

A convex lens, thick in the middle, bends three parallel rays together so they cross at the focal point F on its far side. The principal axis is marked.

Concave lens

A concave lens, thin in the middle, spreads three parallel rays apart so they look as if they come from the focal point F on the near side, shown by dashed lines. The principal axis is marked.

Figure 1: Convex lenses converge rays to a focal point; concave lenses diverge rays away from the axis

๐Ÿ“Š Ray Diagrams for Convex Lens

Case 1: object beyond 2F. The image is real, inverted and smaller.

Ray diagram for a convex lens with the object beyond 2F: two rays from the top of the object meet between F and 2F on the far side, making a smaller real inverted image.

Case 2: object at 2F. The image is real, inverted and the same size.

Ray diagram for a convex lens with the object at 2F: two rays from the top of the object meet at 2F on the far side, making a same size real inverted image.

Case 3: object between F and 2F. The image is real, inverted and larger.

Ray diagram for a convex lens with the object between F and 2F: two rays from the top of the object meet beyond 2F on the far side, making a larger real inverted image.

Case 4: object closer than F. The image is virtual, upright and larger.

Ray diagram for a convex lens with the object inside F: the rays leave the lens spreading apart, and dashed lines traced back meet at a larger upright virtual image on the same side as the object.

Figure 2: Ray diagrams showing image position and type for different object distances

๐Ÿ“ธ Real vs Virtual Images

Real Image:

  • Formed where light rays actually meet
  • Can be projected onto a screen
  • Always inverted (upside down)
  • Formed by convex lenses when object is beyond F

Virtual Image:

  • Formed where light rays appear to come from (rays diverge and don't actually meet)
  • Cannot be projected onto a screen
  • Always upright
  • Formed by: concave lenses, convex lens when object is closer than F, plane mirrors

๐Ÿ”‘ Key Terms and the Magnification Equation

  • Principal axis: the straight line through the centre of the lens, at right angles to it
  • Focal point (F), also called the principal focus: where parallel rays converge (convex) or appear to diverge from (concave)
  • Focal length (f): the distance from the lens centre to the focal point
  • Magnification = image height รท object height
Magnification = image height รท object height
If magnification > 1, image is larger; if < 1, image is smaller; if = 1, image is same size

Quick Check: An object is 2 cm tall and its image through a lens is 6 cm tall. What is the magnification?

โš™๏ธ How It Works: Drawing a Ray Diagram for a Convex Lens

To find where an image forms, draw three standard rays from the top of the object:

  1. Ray 1 โ€” Parallel to axis: Arrives at lens parallel to the principal axis โ†’ refracts through the far focal point (F)
  2. Ray 2 โ€” Through centre: Passes straight through the centre of the lens without bending (the two surfaces are parallel at the centre, so no net refraction)
  3. Ray 3 โ€” Through near focal point: Passes through the near focal point before the lens โ†’ exits the lens parallel to the principal axis

Where any two of these rays cross is where the real image forms. If the rays diverge on the far side, trace them back โ€” where they appear to come from is a virtual image.

๐Ÿ“– Key Definitions

Convex (converging) lens: A lens that is thicker in the middle, which refracts parallel rays to converge at the focal point.

Concave (diverging) lens: A lens that is thinner in the middle, which refracts parallel rays to diverge, appearing to originate from the focal point on the same side.

Focal length: The distance from the centre of the lens to the focal point, measured in metres.

Real image: An image formed where light rays actually converge; can be projected onto a screen; always inverted.

Virtual image: An image formed where light rays appear to diverge from; cannot be projected onto a screen; always upright.

Magnification: The ratio of image height to object height; magnification = image height รท object height (no units).

โš ๏ธ Common Misconceptions

Misconception 1: "Real images are always larger than the object"

Real images can be larger, smaller, or the same size as the object depending on where the object is placed relative to the focal point. An object placed between F and 2F gives a magnified real image. An object placed beyond 2F gives a diminished (smaller) real image. Only at exactly 2F is the image the same size.

Misconception 2: "All images formed by a concave lens are small"

Concave lenses always produce virtual, upright, and diminished images regardless of where the object is placed. The image is always smaller, not always tiny. The further from the lens the object is, the smaller the image becomes.

Misconception 3: "A virtual image means there is no light there"

A virtual image is not less "real" in terms of what you see. Your eye receives diverging rays and traces them back to where they appear to come from โ€” this is the virtual image. When you look in a mirror, you see a virtual image. The image appears to be behind the mirror, but your eye treats it as real for the purpose of what you see.

๐Ÿง  Memory Aid

Convex vs Concave: Con-VEX = VEXed, it pushes rays inward (converges). Con-CAVE = CAVEd in, it pulls rays outward (diverges).

Real vs Virtual image: REAL rays Really meet. VIRTUAL rays only Virtually (seem to) meet.

Object position โ†’ image type (convex lens):

  • Object beyond 2F โ†’ real, inverted, diminished
  • Object at 2F โ†’ real, inverted, same size
  • Object between F and 2F โ†’ real, inverted, magnified
  • Object closer than F โ†’ virtual, upright, magnified (magnifying glass!)

๐ŸŽ“ Higher Tier Only: Correcting Vision Problems with Lenses

Short-sightedness (myopia): The lens of the eye is too powerful (too converging), causing images to focus in front of the retina. Corrected with a concave (diverging) lens, which spreads rays slightly before they enter the eye, so the eye lens can focus them on the retina.

Long-sightedness (hyperopia): The lens is not powerful enough, causing images to focus behind the retina. Corrected with a convex (converging) lens, which converges rays slightly before they enter the eye, helping the eye lens to focus the image on the retina.

This is testable as a describe/explain question: you need to state the problem (where rays focus), the type of corrective lens used, and why it works.

Quick Check: A student places an object between a convex lens and its focal point. Describe the image formed.

๐ŸŽฏ Exam Focus

Frequently Examined

This topic is on all four boards (AQA, Edexcel, OCR A and OCR B). The question types below are worth practising.

This topic is examined in Edexcel 1PH0/1 (Paper 1). Edexcel lens questions often include ray diagram completion, magnification calculations, and explaining how lenses correct long-sight or short-sight.

Lenses and images typically appear as:

  • Ray diagram questions โ€” draw or complete a ray diagram for a convex lens
  • Describe the image โ€” state whether it is real/virtual, upright/inverted, magnified/diminished
  • Magnification calculations โ€” straightforward formula application
  • Vision correction (Higher) โ€” explain how concave or convex lens corrects eyesight

Important: When asked to "describe the image," give ALL three characteristics: real/virtual, upright/inverted, magnified/diminished.

๐Ÿ’ก Exam Tips

๐ŸŽฏ Common Question Types:

  • Complete a ray diagram for a convex lens (3 marks)
  • Describe the image formed in terms of type, orientation, and size (3 marks)
  • Calculate magnification from image/object heights (2 marks)
  • Explain how lenses correct vision problems (Higher, 4 marks)

๐Ÿ“ Key Command Words:

  • Draw: Show three rays correctly with arrows, mark image position
  • Describe: State real/virtual, upright/inverted, magnified/diminished
  • Explain: Describe what the lens does to the ray and why (refraction)
  • Calculate: image height รท object height, no units needed

โš ๏ธ Common Mistakes to Avoid:

  • Forgetting to draw arrows on ray diagram lines (marks deducted)
  • Giving only one characteristic when "describe" asks for the image (always give all three)
  • Saying virtual images cannot be seen โ€” they CAN be seen, just not projected
  • Confusing convex (converging) with concave (diverging)

Quick Check: What type of lens would you use to correct short-sightedness, and why?

Make this stick

Signing in gives access to all PrepWise features.

PrepWise is a trading name of A3M Quality Solutions Limited, registered in England and Wales, company number 14959172. Registered office: 202 Stroud Road, Gloucester, GL1 5LA. ICO registration ZC267069.