Photosynthesis

Test yourself on Photosynthesis with exam style questions, marked instantly.

Flashcards that come back just before you would forget them.

A revision plan that remembers what you know and shows what to do next.

See which topics you have nailed and which need another look.

Quiz yourself on PhotosynthesisGet your flashcardsBuild my revision planTrack my progress

🌱 The Ultimate Solar-Powered Factory

Imagine a factory that runs entirely on sunlight, uses carbon dioxide as raw material, and produces both food and oxygen as output. Every green leaf on Earth is exactly that factory. Photosynthesis is the process that feeds virtually every living thing on the planet — and it all happens inside tiny organelles smaller than a grain of sand.

🌿 Explore: Inside a Chloroplast

Tap each part of the chloroplast to see how it is built to capture light and build glucose.

Cross-section close-up of a chloroplast showing the double outer membrane, stroma fluid, and stacks of chlorophyll-containing discs

🔬 How Photosynthesis Works

Photosynthesis is the process by which plants use light energy to convert carbon dioxide and water into glucose and oxygen. Word equation: carbon dioxide + water → glucose + oxygen. Symbol equation: 6CO₂ + 6H₂O → C₆H₁₂O₆ + 6O₂ (requires light energy). It occurs in the chloroplasts, which contain the green pigment chlorophyll that absorbs light. Photosynthesis is endothermic — it stores light energy as chemical energy in glucose. The rate of photosynthesis is controlled by limiting factors: light intensity, CO₂ concentration, and temperature.

Photosynthesis takes place in chloroplasts — organelles found in plant cells and algae. Chloroplasts contain the green pigment chlorophyll, which absorbs light energy (mainly red and blue wavelengths) and uses it to power the conversion of carbon dioxide and water into glucose and oxygen.

The balanced symbol equation is:

6CO2 + 6H2O → C6H12O6 + 6O2 (requires light energy)

Photosynthesis is an endothermic reaction — it absorbs energy from light and stores it as chemical energy in glucose molecules.

🚦 Limiting Factors

The rate of photosynthesis is controlled by whichever resource is in shortest supply — the limiting factor. The three main limiting factors are:

  • Light intensity: More light increases the rate — up to a point where another factor becomes limiting.
  • CO2 concentration: More CO2 means more raw material for glucose production.
  • Temperature: Enzymes work faster with more heat, but above ~40°C they denature and the rate drops.

On a graph, the rate rises with the limiting factor, then plateaus when something else takes over as the new bottleneck.

🍬 Uses of Glucose

Plants use the glucose produced during photosynthesis for five key purposes:

  • Respiration — glucose is broken down to release energy for life processes.
  • Starch — excess glucose is converted to insoluble starch for storage.
  • Cellulose — glucose is used to build cell walls.
  • Lipids — glucose is converted into fats and oils for energy storage in seeds.
  • Proteins — glucose combines with nitrate ions (from soil) to make amino acids and proteins.

🧪 Required Practical: Investigating Rate of Photosynthesis

In this practical you use an aquatic plant (Elodea) to measure the rate of photosynthesis by counting oxygen bubbles per minute at different light intensities.

  • Place Elodea in sodium hydrogen carbonate solution (provides CO2).
  • Use a lamp at measured distances to vary light intensity.
  • Control temperature using a water bath.
  • Count bubbles per minute at each distance — more bubbles = faster rate.
  • Plot rate against 1/d2 to test the inverse square law.

How It Works: Limiting Factors and the Rate-Limiting Step

Photosynthesis is a multi-step process that requires light energy, carbon dioxide, and water to proceed simultaneously. The rate of photosynthesis is determined by whichever of these three resources is in shortest supply — this is called the limiting factor.

Think of it like a production line with three workers: one collecting light, one collecting CO2, and one collecting water. If the water-collecting worker is slow, the entire line slows down no matter how fast the other two work. Increasing the speed of the other workers does nothing until the bottleneck is fixed.

This is why, in a greenhouse experiment, doubling the light intensity may not increase the rate of photosynthesis if CO2 concentration is already the limiting step. The reaction simply cannot go faster until you address the actual bottleneck.

Temperature affects photosynthesis because it controls the speed of the enzymes that carry out the chemical reactions inside the chloroplast. At low temperatures, enzyme molecules move slowly and collide with substrates less frequently, reducing the reaction rate. At temperatures above about 40°C in most plants, the enzymes begin to denature — their active site changes shape so the substrate can no longer bind — and photosynthesis slows irreversibly.

Light energy drives the first stage of photosynthesis: it is absorbed by chlorophyll and used to split water molecules. The products of this first stage are then used in the second stage where CO2 is converted into glucose. This is why light intensity affects rate directly — without enough light, the first stage slows, and the entire pathway grinds to a halt regardless of CO2 availability.

Key Definitions

Photosynthesis: A chemical process in which plants, algae, and some bacteria use light energy to convert carbon dioxide and water into glucose and oxygen. It is the means by which virtually all energy enters food chains.
Chlorophyll: The green pigment found in chloroplasts that absorbs light energy (mainly red and blue wavelengths) to power photosynthesis. It reflects green light, which is why plants appear green.
Chloroplast: A membrane-bound organelle found in plant cells and algae that is the site of photosynthesis. It contains chlorophyll and the enzymes needed to convert CO2 into glucose.
Limiting factor: The variable that is present in the lowest amount relative to what the process needs, and therefore controls the maximum rate of that process. For photosynthesis, the three main limiting factors are light intensity, CO2 concentration, and temperature.
Endothermic reaction: A chemical reaction that absorbs energy from the surroundings. Photosynthesis is endothermic because it takes in light energy and stores it as chemical energy in glucose molecules.
Glucose: A simple sugar with the formula C6H12O6, produced during photosynthesis. It is the primary energy source for cellular respiration and is also used to build starch, cellulose, lipids, and proteins in plants.
Starch: An insoluble storage carbohydrate made from many glucose molecules joined together. Plants convert excess glucose to starch for long-term energy storage (e.g., in roots, seeds, and leaves).
Rate of photosynthesis: How quickly photosynthesis is occurring, measured by the volume of oxygen produced per unit time (e.g., bubbles per minute from an aquatic plant) or by the decrease in CO2 concentration.

Common Misconceptions

Misconception: "Plants only photosynthesise during the day and only respire at night."

Reality: Plants respire continuously — 24 hours a day, 7 days a week — just like animals. Respiration never stops because cells always need energy. During daylight, plants also photosynthesise, and the rate of photosynthesis normally exceeds respiration, so there is a net release of oxygen. At night, without light, photosynthesis stops but respiration continues, so plants take in oxygen and release CO2. The mistake is thinking these processes are opposites that switch on and off alternately.

Misconception: "Photosynthesis and respiration are just opposites of each other and cancel out."

Reality: Although the equations look like reverses of each other, photosynthesis and respiration serve entirely different purposes and occur in different organelles. Photosynthesis (in chloroplasts) stores energy in glucose. Respiration (in mitochondria) releases that stored energy for use. They do not simply cancel out — a plant that photosynthesises more than it respires is growing and storing biomass. If they always cancelled perfectly, plants could never grow.

Misconception: "Plants get their food (nutrients) from the soil through their roots."

Reality: Plants make their own food (glucose) through photosynthesis — they are autotrophs (self-feeders). What plants absorb from soil through roots are water and mineral ions (such as nitrates, magnesium), not food. These minerals are needed for specific processes (e.g., nitrates for making amino acids, magnesium for making chlorophyll), but the energy-containing organic molecules — glucose, starch, cellulose — are all manufactured by the plant itself using CO2, water, and light.

Misconception: "Increasing light intensity always increases the rate of photosynthesis."

Reality: Increasing light intensity only increases photosynthesis rate if light is the limiting factor. Once light is no longer limiting (i.e., the plant has more light than it can use), increasing it further has no effect. At that point, CO2 concentration or temperature becomes the new limiting factor, and further improvement requires increasing whichever of those is now the bottleneck.

Memory Aids

The photosynthesis equation — "Six CO2 plus six H2O, light makes glucose and six O2":

Written out: 6CO2 + 6H2O + light energy → C6H12O6 + 6O2

Say it as a rhythm: "Six carbon dioxide, six water, light goes in — glucose comes out, and six oxygen."

Limiting factors — COLT:

  • C — CO2 concentration
  • O — (O2 is produced, not a limiting factor — helps you remember what comes out)
  • L — Light intensity
  • T — Temperature

The three actual limiting factors are C, L, and T. If any one of them is too low, it will cap the rate no matter what the others are doing.

Uses of glucose — RSCLP:

  • R — Respiration (release energy)
  • S — Starch (stored in roots and seeds)
  • C — Cellulose (cell walls)
  • L — Lipids (oils and fats in seeds)
  • P — Proteins (with nitrate ions from soil)

Endothermic vs exothermic: Photosynthesis takes energy IN (EN-dothermic, ENtering). Respiration lets energy OUT (EX-othermic, EXiting).

Quick Check: A gardener places a tomato plant on a windowsill and notices that doubling the brightness of a lamp shining on it from 1000 lux to 2000 lux increases the rate of photosynthesis. However, doubling it again from 2000 lux to 4000 lux produces no increase in rate. Explain what is happening at 2000 lux and identify what should be done to increase the rate further.

Quick Check: A student uses an aquatic plant (Elodea) to investigate photosynthesis by counting the number of oxygen bubbles produced per minute at different distances from a lamp. At 10 cm from the lamp, 40 bubbles/min are produced. At 20 cm, only 10 bubbles/min are produced. Use the inverse square law to explain why the rate fell so dramatically despite the distance only doubling.

Quick Check: A commercial greenhouse manager wants to maximise the rate of photosynthesis in their crop year-round. The greenhouse is fitted with powerful lights and a heating system. In January, the manager measures the photosynthesis rate and finds it is the same despite turning on extra lights. Suggest two changes the manager should make and explain the reasoning behind each.

Higher The Inverse Square Law and Light Intensity

Light intensity decreases with distance according to the inverse square law:

Intensity ∝ 1 / distance²

This means if you double the distance from the light source, the intensity falls to one quarter (not one half). If you treble the distance, intensity falls to one ninth.

Example calculation: A lamp produces an intensity of 400 arbitrary units at 10 cm. What is the intensity at 20 cm?

  • Ratio of distances: 20/10 = 2
  • Ratio of intensities: 1/2² = 1/4
  • Intensity at 20 cm = 400 × 1/4 = 100 units

This is important for interpreting Elodea bubble-counting experiments. A graph of rate of photosynthesis against 1/d² (not against d itself) should give a straight line through the origin when light is the limiting factor, confirming the inverse square relationship.

Graph analysis at higher tier: On a graph of photosynthesis rate vs light intensity, the rate initially increases linearly. The gradient then decreases and the curve levels off — this plateau indicates that another factor (CO2 or temperature) has become limiting. The plateau itself shifts up when CO2 is increased or temperature is raised (up to the enzyme optimum), confirming which factor was limiting.

Exam Focus

Exam Favourite

Photosynthesis is one of the most heavily examined topics in GCSE Biology, appearing across all specifications. Edexcel 1BI0 Paper 2 (Topic 6: Plant Structures and Their Functions) tests photosynthesis with stimulus-based questions — you will commonly be given a graph or experimental data and asked to describe trends, explain limiting factors, or evaluate the experimental design. The "Suggest" command is used when the context is unfamiliar (e.g., a new plant species). Questions range from simple equation recall to complex multi-variable graph analysis.

  • Equation recall (1-2 marks): You must know both the word equation and the balanced symbol equation. The word equation is: carbon dioxide + water → glucose + oxygen. Many students lose marks by writing the symbol equation with incorrect coefficients or by omitting "light energy."
  • Limiting factors (3-5 marks): The most common question type. You will be given a graph or data and asked to identify and explain the limiting factor at different points. Always state what is limiting AND explain why — for example: "At point X, light is the limiting factor because even though CO2 is available, there is insufficient light energy to drive the light-dependent reactions at a faster rate."
  • 6-mark extended response: Often asks you to evaluate the effect of two or more limiting factors, or to explain why the rate plateaus. Examiners look for: correct identification of limiting factor, explanation of mechanism, and what would need to change to increase the rate further.
  • Uses of glucose (2-3 marks): Students frequently list only respiration and starch. For full marks, also include: cellulose (cell walls), lipids (seed storage), and proteins (requiring nitrate ions from soil).
  • RPA5 practical questions: Elodea bubble-counting is frequently examined. Know the variables (independent, dependent, control), why a water bath is used (control temperature), and why sodium hydrogen carbonate solution is used (provides CO2).

Common mark losses: Forgetting to include "light energy" in the photosynthesis equation. Writing that plants "get food from the soil." Saying photosynthesis is exothermic (it is endothermic). Failing to explain the plateau on limiting factor graphs. Not mentioning enzyme denaturation when explaining temperature effects above the optimum.

Exam Tips: Photosynthesis

Always include "light energy" in the equation: The word equation is carbon dioxide + water + light energy → glucose + oxygen. Examiners specifically look for "light energy" as a reactant. Leaving it out costs a mark, even if the rest is correct.

Limiting factors — identify then explain: It is not enough to name the limiting factor. You must explain the mechanism. For light: "Light energy is needed to drive the first stage of photosynthesis; without enough light, the reaction cannot proceed faster." For CO2: "CO2 is the raw material converted into glucose; insufficient CO2 means fewer substrate molecules are available." For temperature: "Enzymes catalyse the reactions; at low temperatures they collide less frequently with substrates."

Temperature above optimum means denaturation, not just slowing: Below the optimum, more heat means faster enzymes (more kinetic energy, more frequent collisions). Above the optimum, enzymes are denatured — the active site changes shape permanently and the substrate cannot bind. These are two different mechanisms with different implications.

Uses of glucose — list all five: Respiration, starch (storage), cellulose (cell walls), lipids (seed oils), proteins (requires nitrate ions from soil). Questions worth 3+ marks expect you to go beyond just "respiration and starch."

RPA5 practical — know why each control is needed: Water bath: controls temperature (so it is not the variable). Black card over sides of beaker: prevents stray light (controls light intensity). Sodium hydrogen carbonate in water: provides dissolved CO2 for the plant (so CO2 is not limiting). Each control variable prevents it from being an unintended limiting factor.

Link photosynthesis to ecology: Exam questions sometimes ask about the environmental importance of photosynthesis. Key points: removes CO2 from the atmosphere (reducing the greenhouse effect), produces oxygen, provides the energy base for food chains, and stores carbon in biomass. These links appear in Unit 4 (Ecology) cross-topic questions.

Make this stick

Signing in gives access to all PrepWise features.

PrepWise is a trading name of A3M Quality Solutions Limited, registered in England and Wales, company number 14959172. Registered office: 202 Stroud Road, Gloucester, GL1 5LA. ICO registration ZC267069.